ART ART405
ART ART405 The 405 is designed to remotely adjust the volume of multiple amplifiers or powered speakers, either individually or in groups. The input of the 405 is connected to a PA mixer’s line-level output (the 405 will accept the output of two mixers) and the power amps and/or powered speakers are connected to the 405Õs zone outputs. Features: Left and right sets of balanced source 1 & 2 inputs can also accept a mono signal source Source 1 & 2 input channels are internally routed to the five zone channels Each zone channel features source 1 & 2 level controls and balanced L / R output connectors Stereo/mono selector button on each zone separates the L / R signals in stereo mode or combines them in mono mode, so all signals are present at both outputs Mono indicator LED on each zone channel Clip and signal LEDs on each zone channel indicate the onset of clipping distortion and signal activity Source 1 & 2 indicator LEDs tell you which source channel is in use Specifications: Input Impedance: 45.1k ohms Maximum Input Level: +18 dBV line Output Level: 22 dBV Output Impedance: 125 ohms Maximum Gain: +6 dB Signal To Noise: 89dB THD: <0.2% Dimensions: 19" x 6" x 1.75" Weight: 6.3 lb. Get Your ART ART405 Today!
Buy It Now! For More Information
ART ART406
ART ART406 The Model 406 Six Channel Headphone Amplifier addresses the requirements for professional headphone mixing. It’s a great processor for professional, project and home studio applications. The processor has an output and level control for each set of headphones, and a stereo input for connecting the program source. The 406 is designed and engineered to be durable and rugged, and is an ideal choice when the need for quality audio processing is of paramount concern. The unit is designed for mounting in a standard 19" equipment rack. Features: Six headphone channels with individual volume control and headphone out jacks Insert jack for each channel to isolate it for specific input signals Single 1/4" stereo input (front) Dual Left / Right 1/4" inputs (rear) Left / Right auxiliary 1/4" inputs (rear) Pan control (front) also regulates Left / Right relative input levels in mono mode Mono/stereo switch able Power LED 1U rack-mount format Specifications: Input Impedance: 100k ohms Maximum Input Level: +18 dBV Output Level: 300mW per channel Maximum Gain: 20dB per channel Signal to Noise: 90dB THD and IMD: <0.008% Frequency Response: 20-30 kHz Power Requirement: 120VAC, 50-60Hz, 15VA Dimensions: 19" x 1.75" x 6" Weight: 5.5 lbs Get Your ART ART406 To...
Buy It Now! For More Information
ART ART416
ART ART416 The Model 416 Six Channel Personal Mixer quickly and easily combines six sources Ð three microphones (or balanced line inputs) and three stereo line inputs into a single stereo line-level mix. It has effects patching and phantom power (included to activate condenser microphones or active DI boxes). The 416 is designed and engineered to be durable and rugged, and is an ideal choice when the need for quality audio processing is of paramount concern. The unit is designed for mounting in a standard 19" equipment rack. Features: Three XLR balanced mic /line inputs with separate volume controls Three sets of RCA stereo inputs with separate volume controls Selectable phantom power for each mic channel Two-band master EQ 1/4" effects send with stereo returns Effects loop level control with bypass switch Specifications: Input Impedance: Mic 600 ohms/XLR Line 22k ohms, Source RCA Inputs 22k ohms Max Input Level: XLR -10dBV MIC level/+20 dBV LINE Level, Source RCAs 24dBV Output Level: +17 dBV Output Impedance: 51 ohms Maximum Gain: 55dB MIC, 26dB SOURCE EQ: +/-12dB FX Loop: L and R Return 22k ohms (unbalanced) Phantom Power: 12 VDC Dynamic Range: 82 dB Dimensions: 19" x 1.75" x 6" Weight: 6.1 lbs Get Your ART ART416 Today!
Buy It Now! For More Information
ART ART418
ART ART418 The 418 Eight Channel Personal Mixer provides eight channels of basic mic/line mixing facilities in a convenient, easy-to-use rack format. In addition to a selection of XLR mic and 1/4" unbalanced line inputs with volume and tone controls. There is also switch-selectable phantom power available on each mic input. The 418 is designed and engineered to be durable and rugged, and is an ideal choice when the need the quality audio processing is of paramount concern. The unit is designed for mounting in a standard 19" equipment rack. Features: Eight mic/line channels with individual volume and tone control Eight sets of balanced XLR mic inputs and 1/4" unbalanced line inputs Eight phantom power DIP switches, one for each mic input 1/4" balanced main out jack RCA-type pre-fade out jack can be connected to another 418 via the aux bus in jack RCA-type Aux Buss IN jack lets you insert the output of another 418 Specifications: Input Impedance: 600 ohms (mic), 18k ohms (line), 10k ohms (aux Bus In) Maximum Input Level: -23 dBV (mic), +22 dBV (line) Output Level: +17 dBV (max) Output Impedance: 51 ohms Maximum Gain: 69 dB (mic), 26 dB (line) Signal To Noise: 106 dB (max) THD: <0.003% Phase Shift: <10 degrees, 20-20kHz Phantom Power: 12VDC CMRR: >52dB (mic) Dimensions: 19&q...
Buy It Now! For More Information
ART ARTS83WAY
ART ARTS83WAY The S83WAY eight channel three way microphone splitter is ideal for live sound, recording and broadcast applications where microphone and XLR balanced line level input signals have to go to multiple mix locations. Each channel provides one XLR input, one XLR direct output with two additional transformer isolated XLR outputs for a total of 3 balanced outputs from each single microphone input signal. Typical uses would include sending 8 direct signals through the S83WAY to a main Front-of-house mixer, with additional feeds going to a monitor mix station while transformer balanced isolated feeds are sent to remote recording desk or used for a broadcast feed. The ART S83WAY features the same high-quality musical sounding transformers used in the popular ART S8, and is housed in a standard 1U space rack-mountable steel chassis designed for years of reliable operation. Features: High quality passive interface Eight high performance transformers One direct and two transformer isolated output per channel Balanced XLR input and 3 balanced XLR per channel Extremely wide frequency response Extremely low voltage insertion loss Reversible rack ears for added system flexibility Live Sound, Permanent/Fixed install, Studio applications Get Your ART ARTS83WAY Today!
Buy It Now! For More Information
ART ARTT8
ART ARTT8 The T8™ (Transformer Eight) a high quality totally passive audio interface that uses 8 transformers to separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The T8’s audio transformers have flat and wide frequency response and handle high signal levels while maintaining an isolated balanced output. This gives the T8 a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100k Ohms. Connection versatility sets the T8 apart from other isolation boxes. The T8 provides balanced XLR, 1/4” phone, and RCA type phono connections on all inputs and outputs simultaneously. The T8 fits easily into virtually any audio system and is a clean patch point between all types of systems. The T8s mounting ears are reversible so you can have either the XLRs on the front or The 1/4” and RCA phono jacks on the front. This maximizes flexibility in cabling your system. Whether you need an interface between a computer based audio workstation and your monitor system, isolation on long cable runs in a fixed installation, isolation of multiple signal sources from your recording equipment, or in many cases, just a safer connection between two audio systems, the T8 can accommo...
Buy It Now! For More Information
ART AVDIBOX
ART AVDIBOX The AV Direct from ART is a direct box with a very specific purpose. It is the ideal solution for any situation where stereo iPods, notebook computers, consumer DVD players HiFi equipment or video machines have to be connected to a single XLR microphone level input. Unlike standard "gender bender" cables or DI boxes, the AV Direct can accept virtually any input connection and output level (including amplified speaker outputs) and offers remote level control, ideal for setting the volume of a component at the source, rather than in an AV room, audio closet or installation rack. The AV Direct has stereo RCA, 1/8-inch and 1/4-inch TRS line level inputs, as well as a 1/4-inch and bare wire pressure clip speaker level inputs. A switchable high-cut filter and ground lift allow the AV Direct to effectively filter out any extraneous noise. The speaker level inputs are heavily padded and transformer isolated from the XLR output, allowing amplified speaker level (up to 100 watts @ 8Ω) to be tapped off, and sent to a microphone level input. A 20Hz to 20kHz frequency response ensures the AV Direct will function seamlessly with any high quality audio source. Features: Multi-input audio/video passive direct box Transformer isolated XLR microphone level output Stereo RCA, 1/8" and 1/4" TRS line level inputs Mono 1/...
Buy It Now! For More Information
ART CleanBox
ART CLEANBOX Adaptin from Balanced to Unbalanced and Vice-Versa: Problem: You have a stereo output from a CD player (tape deck, VCR, computer sound card or other consumer electronics gear) and you need to connect it to the balanced line inputs of your mixer (EQ or other piece of professional audio equipment). Actually, there are three problems: 1.) Your source has RCA connectors and you need to connect to an XLR input. 2.) Your source signal is unbalanced, but you require a balanced signal where you’re plugging into. 3.) The signal levels have to be matched properly. Solution: Use a CleanBOX! Its RCA-to-XLR channel 1 takes RCA signal, matches the signal levels and then provides a balanced (XLR) output. Problem: You have the balanced stereo output of a mixer (an EQ or other piece of pro audio gear) and need to connect it to the inputs of a cassette deck, computer sound card, VCR or another type of consumer electronics unit. The three problems above apply here as well (except your source is balanced, and you require an unbalanced audio signal). Solution: Use a CleanBOX! Its XLR-to-RCA channel 2 takes a XLR balanced signal, matches the signal levels and then provides an unbalanced (RCA) output. Problem: You want to mix your voice (and/or instrument) with a CD and record the mix on a cassette deck or computer. Now you need to interconnect...
Buy It Now! For More Information
ART CleanBox-2
ART CLEANBOX-II “Hum” in an audio system is often caused by loop effects which act like antennas. These loops can easily pick up a 60 Hz (or higher harmonics) hum transmitted by electrical wiring. Typically, these loops are connected via grounds, more commonly called “ground loops”. The safest way to eliminate unwanted noise is with the CleanBOX II. Some examples of Ground Loops: The power ground of a synthesizer, connected to the signal ground of the synth, into a mixer’s ground, then into a mixer’s power ground. The signal ground of a send effect (reverb, delay) into a mixer, and the connecting power grounds of the mixer and the unit. The power ground of a guitar amplifier, connected to a signal processor which has a second guitar amplifier on the other channel, and then the second guitar amp’s power ground. The CleanBOX II easily removes ground loops without any signal degradation. Specifications: Frequency Response: 10Hz-50kHz, +/-.5dB @ +4dBu THD: .01% Typical @ 1kHz, +18dBu, <.05% @ 100Hz, +24dBu Insertion Loss: .4dB @ 100kOhm Load, 5.5dB @ 600 ohm load Connections: 1/4" TRS balanced/unbalanced jacks Power: Passive Dimensions: 4.5" x 2.875" x 1.5" Weight: .9 lbs Get Your ART CLEANBOX-II Today!
Buy It Now! For More Information
ART CoolSwitch
ART COOLSWITCH A/B-Y switching works two ways. It lets you switch a common source signal (guitar, bass or keyboard) between two amplifiers or amp channels. Or conversely, it lets you switch two source signals (ie, two different guitars) into the same amplifier. A good quality A/B-Y switcher will also provide LEDs or other indicators to show whether A, B or Y routing is in effect. The Y routing combines both the A and B outputs in parallel so that two amplifiers can be driven at once. The Cool SWITCH provides full A/B-Y switching functionality, plus parallel Common in/out jacks. Specifications: Power Requirements: 9V Battery (included) Dimensions: 3.75" x 2.5" x 1.5" (90 x 63 x 40 mm) Weight: 1 lb. (454 g) Get Your ART COOLSWITCH Today!
Buy It Now! For More Information
ART DJPre-2
ART DJPre-2 The DJ PRE II (formerly named the “Phono MicroPRE”) acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable rumble while leaving the audio pristine. The front gain trim control and signal/clip LED allow you to optimize the preamp’s gain for a wide range of input sources. The built-in low noise phono preamp circuitry is highly accurate and precisely conforms to the RIAA standard. The line output jacks are low impedance and can be used with any sound card. Housed in an all aluminum black anodized case, the DJ PRE II can be powered by a wide variety of external supplies. If you need to amplify and EQ your vinyl records to interface with your audio workstation, sound card, home stereo system or main monitor system, the DJ PRE II gives you flawless audio reproduction in a rugged and reliable package. Specifications: Signal To Noise Ratio >90dB below clipping Frequency Bands FILTER TYPE: Switchable, Low Cut, -3dB @22Hz Maximum Gain 45dB @1KHz Input Impedance 47k Ohms in parallel with either 100pF or 200pF Maximum Input Level 40mVrms @1KHz Maximum Output Level +6dBu (1.4Vrms) Input Connectors RCA Outpu...
Buy It Now! For More Information
ART DMPAII
ART DMPAII The ART Digital MPA-II delivers all of the same great features of the ProMPA with the added versatility of digital output. Like the ProMPA-II, each input circuit has 48V phantom power and features variable input impedance which can radically vary the overall performance of any high quality dynamic or ribbon microphone. The Digital MPA-II can be configured for dual mono or stereo operation with selectable mid/side mic support, summing the adjacent channel, to decode left/right signals. The input section of the Digital MPA-II operates at either a low or high plate voltage applied to the two integrated hand-selected 12AX7 tubes for wider variation of preamp tone and performance. Large back-lit analog VU output meters display input or output levels while multi-colored LED arrays, with average or peak hold, show tube gain and digital output levels. In addition to XLR and 1/4" analog outputs, the Digital MPA-II features a high quality A to D converter which offers digital connectivity on S/PDIF, ADAT, or AES/EBU outputs. A rotary control on the front panel allows selection of format and sample rates from 44.1 to 192kHz and 16 bit dithering. There is also a push button for, and two wordclock jacks, allowing loop-through. The Digital MPA-II comes in a standard 2U space rack-mountable steel chassis, with CNC routed black anodized aluminum face panel...
Buy It Now! For More Information
ART DPDB
ART DPDB The new dPDB™ Passive Direct Box features two high-quality direct boxes in one portable enclosure. It is a rock solid, roadworthy DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced inputs. It also allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer. The dPDB™ features switchable Input Attenuation (0 dB, -20dB, -40dB), a 50k Ohm Instrument Input, 50k Ohm Parallel Link jack, a 600 Ohm XLR Output Jack, and a switchable Ground Lift. The dPDB excels at impedance matching and improving the sound of any instrument plugged into it. The ART dPDB™ is a must-have in any audio tool kit. Enclosed in a rugged steel chassis, it is designed and manufactured to the highest standards to provide years of quiet, reliable performance. Applications: Electric guitar and bass pick up output signals - The high impedance signal from a guitar or bass guitar pickup is translated by the dPDB™ into a low impedance balanced signal required by mixing consoles. Keyboards and line level signals - The dPDB™ automatically balances and matches the line level outputs of modern electronic keyboards. If you are using a multiple keyboard setup and your keyboards are all plugged into a single inst...
Buy It Now! For More Information
ART DPSII
ART DPSII The DPS II updates the latest ART advances in Tube Microphone Preamps. The DPS II adds continuously variable input impedance, LED input meters, auto mic/instrument switching, OPL(Output Protection Limiting) flexibility and more tube warmth to the DPS II. Twin high performance discrete preamplifiers with local feedback are coupled with flexible V3(Variable Valve Voicing) 12AX7A gain stage (which delivers both flexibility and consistency in settings) and choice of analog and digital outputs. he new enhanced mic preamp can accept +20dB peaks while maintaining over 120dB dynamic range and incredibly low distortion. A LED input meter, monitors the signal level of the input amplifier. The auto-switching input allows the DPS II rear inputs to stay patched in while you use the front panel instrument inputs. Enhancements to ART's legendary tube stage maintain our classic "warm sound" and add additional tube voicings specifically tailored to vocal, guitar, bass, and acoustic instruments making this an incredible DI box. The enhanced OPL is available to control overshoots and normalize levels before digital clipping occurs. A versatile insert loop on each channel provides access for additional signal processing or direct access to our high quality A/D converter. Separate gain controls on analog and digital outputs allow you to optimize the uni...
Buy It Now! For More Information
ART DTI
ART DTI The DTI (Dual Transformer/Isolater) is a high quality totally passive audio interface that uses a pair of high performance transformers to totally separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100k Ohms. What further sets the DTI apart from other lesser isolation boxes is its connection versatility. We have provided XLR, 1/4” phone, and RCA type phono connections on all inputs and outputs. This allows it to easily fit into virtually any audio system and be the clean patch point between all types of systems. Whether you need an interface between a computer based audio workstation and your monitor system, isolation on long cable runs in a fixed installation, isolation of a signal source from your recording equipment, or in many cases, just a safer connection between two audio systems, the DTI can accommodate. The compact black anodized all aluminum case and it’s passive design allow the DTI to provide years of trouble free s...
Buy It Now! For More Information
ART EQ-341
ART EQ-341 ART's 341 Dual Channel 15 band 2/3 octave graphic equalizer features: constant Q circuitry with a 3% center frequency accuracy, 20mm center detent sliders, selectable boost/cut range of 6dB or 12dB, active balanced and unbalanced input and output connect-ions, variable input level control, clip level indicators, ground lift switch, internal power supply and selectable line voltage switch. A range control switch is provided allowing you to set the maximum boost or cut for each band of equalization to either 6dB or 12dB. Each channel has its own bypass switch with LED indicator. The rugged, all-steel constructed chassis occupies 1U rack space and is intended for installation in standard 19" equipment racks. Multiple input and output configurations are provided for ease of use and incorporate paralleled connections. The XLR and 1/4" TRS connectors use active balanced, low noise circuitry. XLR connections are: Pin 1 = ground, Pin 2 = Hot (+), and Pin 3 = Cold (-). The 1/4" TRS connections are: Tip = Hot (+), Ring =Cold (-), and Sleeve = ground. Both the XLR and 1/4" connectors may be used in an unbalanced configuration. The RCA jacks are unbalanced. The 341 is designed to work with a variety of signal levels. The input level control covers a wide range and can easily accommodate -10 and +4 signal levels. A clip LED will light wh...
Buy It Now! For More Information
ART EQ351
ART EQ351 ART's 351 Single Channel 31 band 1/3 octave graphic equalizer features: constant Q circuitry with a 3% center frequency accuracy, 20mm center detent sliders, selectable boost/cut range of 6dB or 12dB, active balanced and unbalanced input and output connect-ions, adjustable high pass filter, adjustable low pass filter, variable input level control, clip level indicators, ground lift switch, internal power supply and selectable line voltage switch. A range control switch is provided which allows you to set the maximum boost or cut for each band of equalization to either 6dB or 12dB. The high pass filter rolls off lower frequencies which is useful for decreasing rumble or low frequency hum from a signal . Its range is adjustable from 10Hz to 250Hz. Frequencies below this setting are rolled off, while frequencies above are unaffected. The low pass filter rolls off higher frequencies which is useful for reducing hiss or sibilance from a signal. Its range is adjustable from 3kHz to 40kHz. The rugged, all-steel constructed chassis occupies 1U rack space and is intended for installation in standard 19" equipment racks. Multiple input and output configurations are provided for ease of use and incorporate paralleled connections. The XLR and 1/4" TRS connectors use active balanced, low noise circuitry. XLR connections are: Pin 1 = ground, Pin 2 =...
Buy It Now! For More Information
ART EQ355
ART EQ355 The Model 355 Dual 31-Band 1/3 Octave Graphic Equalizer may be used in a variety of applications such as live sound, recording studios, instrument racks, DJ sound systems and fixed equipment installations. Designed to interface into any audio system, the Model 355 is a powerful tool for solving audio problems and creating interesting sound textures. The Model 355 possesses a long list of impressive features including: constant Q circuitry, 20mm center detent sliders (with a selectable boost/cut range of 6dB or 12dB), balanced XLR and 1/4" and unbalanced RCA input and output connections, adjustable high pass and low pass filters, variable input level controls, signal clip level indicators, ground lift switch, internal power supply and selectable line voltage switch. The rugged, all-steel constructed chassis occupies 2U rack spaces and is intended for installation into standard 19" equipment racks. Get Your ART EQ355 Today!
Buy It Now! For More Information
ART HeadAmp4
ART HeadAmp4 The HeadAmp4 offers 1/8th-inch as well as 1/4-inch inputs and outputs as well as lower noise, lower distortion and more output in a new custom extruded stackable metal case. Ideal for virtually any home or project studio, the ARTcessories HeadAmp4 easily adds additional headphone outputs to any mixer, computer audio interface, workstation, iPod, media player or laptop without creating any additional load on the existing headphone source. Individual level controls for the four headphone outs, 1/4-inch and now 1/8th-inch connections allow the HeadAmp4 to connect to virtually any source, and drive any headphone configuration including studio phones, in-ear monitors or custom ear pieces or any combination of the above. Get Your ART HeadAmp4 Today!
Buy It Now! For More Information
ART Headamp5
ART Headamp5 Home recording studios have become a fact of life with more and more finished products going straight from the spare room to the distributor. As a result there is a need for flexible, professional headphone monitoring sufficient for a number of performers, all at a reasonable cost. Basic headphone amps offer one set of stereo inputs and volume-controlled headphone outputs, however more options are needed in the studio. For example, it may be necessary to connect more than one stereo source – possibly the aux. or monitor output from the mixer plus the stereo output of a tape deck or CD player. It may also be necessary to insert reverb or EQ on certain headphone channels, and to interconnect two headphone amps for additional performers. Naturally, there needs to be a level control for each headset, clean, accurate reproduction and plenty of power. Get Your ART Headamp5 Today!
Buy It Now! For More Information
ART HeadAmp6Pro
ART HeadAmp6Pro The ART HeadAMP6 Pro 6 Channel Headphone Amplifier has everything you need in a headphone amp. The HeadAMP6 delivers six independent high-power headphone outputs, each with bass and treble controls with dual function pan/mix control per channel. Along with Stereo aux input for each channel and multiple monitoring settings per channel. Precision eight-segment LED bar graph per channel. Front panel main insert jack. Front- and rear-mounted headphone jacks. XLR and 1/4 inch main inputs and outputs. Parallel main outputs for multiple unit use. Each channel also offers an extensive feature set and routing capabilities that make the HeadAMP6 Pro the ultimate headphone monitoring and distribution system. Specification: Six independent high-power amplifier channels Bass and treble EQ per channel Dual function pan/mix control per channel Stereo aux input for each channel Multiple monitoring settings per channel Precision eight-segment LED bargraph per channel Front panel main insert jack Front- and rear-mounted headphone jacks XLR and 1/4 inch main inputs and outputs Parallel main outputs for multiple unit use Get Your ART HeadAmp6Pro Today!
Buy It Now! For More Information
|
ART HeadTap
ART HeadTap The ART HeadTap Headphone Tap is a passive device with an input to connect the PA or monitor amplifier and an output to connect your headphones. Sometimes floor monitors are a problem. There isn't enough room for them onstage or someone sits in and can't hear the monitors, or the drummer can't hear them well enough. Or perhaps it's a pickup gig or a rehearsal and you didn't have enough time to set them up. In any case, sometimes it's preferable to just to put on headphones and somehow connect them to the PA. That's where a headphone tap comes in. A volume control regulates the headphone output and internal resistors keep the unit's impedance high enough to protect the phones. It also protects the amplifier from encountering too low a load impedance while powering tap units, the speaker system, or several tap units by themselves. The HeadTAP will also work with a stereo headphone amplifier for use in recording situations when you want to add headphones for additional performers. ART HeadTap Headphone Tap Specifications: Dual parallel 1/4" stereo/mono inputs permit daisy-chaining taps and/or speakers Stereo/mono input selector button Dual 1/4" stereo/mono headphone jacks Level control Input impedance: 150 ohms 3.75"W x 1.5"D x 2.875"D 1 lb. ART HeadTap Headphone Tap Features: Passive operation ...
Buy It Now! For More Information
ART HQ231
ART HQ231 The newest member of the HQ SERIES: HQ 231. features ART's FDC Feedback Detection Circuitry. The ART proprietary FDC differs from similar systems in that it is extremely fast. Although it illuminates the band with the greatest energy with the brightest LED, it doesn't fully discriminate between bands and will not get "stuck" on one band when there is no signal. The HQ 231 utilizes a set of indicators that show which of the many EQ bands has the greatest energy. The LED indicators can immediately show which band corresponds to the feedback frequency, allowing the sound engineer to reduce gain in that band to quickly kill the feedback while having a minimal impact on the sound of the live program material. The FDC also acts as a simple spectrum viewer while the concert proceeds showing where the "hot" areas are. During system setup and sound check, the FDC may be used to help identify room and sound system resonances. By increasing the gain until feedback, it is easy to identify those frequencies that are likely to be problems. Reducing the gain in these bands helps tune the sound system, and, remove problem areas before the show begins. It also helps increase the gain margin before feedback. The unit also features constant Q circuitry, 45mm center detent sliders with selectable boost or cut range of 6dB or 12dB, balanced XLR, ...
Buy It Now! For More Information
ART M-FIVE
ART M-FIVE Created to complement ART’s industry leading brand of tube preamps, tube compressors and recording accessories, the ART M-Series will set the performance standard for professional microphones in this class and price category. Three all new innovative wide diaphragm side address FET microphones and one compact large diaphragm classic ribbon microphone make up the new M-Series microphone line. The ART M-Five Ribbon Microphone is a modestly priced microphone designed for crucial capturing of vocals and instruments in project studio recording applications. The aluminum ribbon transducer measures 2.5mm microns thick and exhibits fast transient response without distortion. This and its wide frequency response result in clear audio reproduction without noise and distortion. The M-Five doesn't require phantom power and includes an aluminum case and shock mount. Features: Low-Mass Aluminum Ribbon Element Figure-8 Polar Pattern Fast Transient Response without distortion Includes Aluminum Case Includes Shock mount Low residual noise Get Your ART M-FIVE Today!
Buy It Now! For More Information
ART M-ONE
ART M-ONE The M-one cardioids condenser microphone delivers solid quality and outstanding performance in an extremely cost effective microphone. The low-mass diaphragm and upgraded capsule delivers an incredibly clear tone with accurate sonic detail, making it perfect for a wide range of vocal recording applications including singers, spoken word, Mcs and much more. The M-one perfectly combines superior sound quality and a fantastic price, making it suitable for both bedroom and studio environments. Specifications: Professional FET condenser microphone 20 Hz - 20,000 Hz frequency response 200ohms impedance Cardioids polar pattern 48v phantom powered Black finish Male xlr connector Ideal for vocal recording or instrument pickup Microphone stand mount included Features unique purple LED in-light for dark studios Weight: 1.0kg (including packaging) Get Your ART M-ONE Today!
Buy It Now! For More Information
ART M-THREE
ART M-THREE Created to complement ART’s industry leading brand of tube preamps, tube compressors and recording accessories, the ART M-Series will set the performance standard for professional microphones in this class and price category. Three all new innovative wide diaphragm side address FET microphones and one compact large diaphragm classic ribbon microphone make up the new M-Series microphone line. Created to complement ART's industry leading brand of tube preamps, tube compressors and recording accessories, the ART M-Series microphones are specifically for professional, project and high-end home studio environments. These wide diaphragm side-address FET microphones deliver superior sound and build quality, clarity and an unrivalled tone. The ART M-Three multi-pattern large-diaphragm FET condenser microphone is ideal solution for demanding studio applications. Capable of handling even high SPL sources, the ART M-Three delivers a warm and highly transparent sound quality from the upgraded dual diaphragm capsule. Ideal for tracking essential sources including solo vocals, ensemble vocals, acoustic grand pianos, acoustic guitar and drums and percussion instruments, the M-Three, selectable polar patterns (cardioid, omni-directional and figure-eight) ensure maximum versatility in a wide range of recording applications including highly precise stereo ...
Buy It Now! For More Information
ART M-TWO
ART M-TWO Created to complement ART’s industry leading brand of tube preamps, tube compressors and recording accessories, the ART M-Series will set the performance standard for professional microphones in this class and price category. Three all new innovative wide diaphragm side address FET microphones and one compact large diaphragm classic ribbon microphone make up the new M-Series microphone line. Created to complement ART's industry leading brand of tube preamps, tube compressors and recording accessories, the ART M-Series microphones are specifically for professional, project and high-end home studio environments. These wide diaphragm side-address FET microphones deliver superior sound and build quality, clarity and an unrivalled tone. The ART M-Two large-diaphragm cardioids FET condenser microphone is an ideal choice as the main microphone for live applications as well as upscale home and project studios. Capable of handling high SPL while still delivering warmth and clarity from the upgraded 32 mm capsule, this versatile microphone is the perfect cost-effective "go to" mic for tracking solo vocals, acoustic & electric guitars, solo brass & woodwinds, for drum overheads, and percussion instruments. A switch able high pass filter at 100 Hz or 200 Hz tailors the microphone for any source material, and selectable -6dB and -12...
Buy It Now! For More Information
ART MACROMIX
ART MacroMix A great little problem solver. Connect MacroMix between up to 4-line level sources and output to a stereo RCA output. 4 level controls. Inputs 1 & 2 are stereo RCA, input 3 is either 1-1/4” input or dual RCA inputs, and input 4 is a 1/4” input. 1/4” headphone/line output provided, and up to 32dB of input gain is possible. 12VDC. Get Your ART MacroMix Today!
Buy It Now! For More Information
ART MyMONITOR
ART MyMONITOR With the ART MyMONITOR Personal Monitor Mixer you can hear yourself while sending only the mic signal to the main mixer. Just connect MyMONITOR between the microphone and line source and the mixer. Can be AC or battery powered. Dynamic or condenser mics can be used since phantom power comes through the Mic Thru jack from the mixer or other source. Dual headphone jacks. ART MyMONITOR Features: Can be AC or battery powered Dynamic or condenser mics can be used Dual headphone jacks Get Your ART MyMONITOR Today!
Buy It Now! For More Information
ART PB4X4
ART PB4X4 PB 4x4 features ART's "4x4" distribution on the back of the unit -- four of the eight rear outputs are 1.25 inches apart. This allows the user to plug in wide power cables and multiple wall wart devices, and still have eight total power outlets to choose from. Built into the PB 4x4 is a Surge and Spike Protection System, designed to protect powered equipment from harmful electric surges and spikes. The unit also has RFI and EMI filtering. The PB 4x4 also features a front-located on/off power switch (which lights up when turned on), and a front-mounted circuit breaker reset switch. The unit has a total power capacity of 1800 watts, and has a front-mounted, 15 amp circuit breaker. The rugged, all-steel chassis occupies 1U rack spaces and is intended for installation into standard 19" equipment racks. Applications for the PB 4x4 include Live Sound Systems/PA, Permanent or Fixed Installations, Church, Club and Practice PA Systems, DJ Sound Systems, Home and Project Recording Systems, and Monitor Systems. Features: Surge & Spike Protection EFI & RFI Filtering Eight Rear Outlets "4 x 4" Power Distribution System 1800 Watts Capacity Front On-Off Power Switch Designe For Years of Continuous, Reliable Performance Rugged All-Steel Construction Specifications: Power Outlets: Eight Rear Outlets with "4 X 4...
Buy It Now! For More Information
ART PB4X4PRO
ART PB4X4PRO Presenting the 4x4 PRO SERIES Power Distribution Systems from ART. Built on the foundation of the popular 4x4s, the PRO SERIES are durably constructed, reliable power conditioners for use in many applications. Wherever power management system is required, the 4x4 PRO SERIES provide the surge protection you need to keep your rack safe from unwanted disruption. All PRO SERIES models have an additional internal discrete module called APF™ (Advanced Power Filtering) which filters out digital and dimmer hash as well as any high frequency noise that is above the audio range. Some off-the-shelf add-on modules saturate and lose their filtering effectiveness as the load increases, but by using a high power discrete design we were able to create a filter that stays effective over the full operating range. By using both Common Mode and Differential Mode topologies in series for the filter design we are able to block virtually all of the unwanted noise that is between the AC line and ground, and also the two sides of the AC line. This has the additional benefit of reducing ground loop problems in your system. High frequency noise currents in particular are highly attenuated in both directions so that any line noise that could be generated by one of your components is not allowed to get back into your main A.C. wiring so if you use a number of PRO ...
Buy It Now! For More Information
ART PDB
ART PDB The PDB™ Passive Direct Box is a rock solid, roadworthy DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced inputs. The PDB™ also allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer. Applications: Electric guitar and bass pick up output signals - The high impedance signal from a guitar or bass guitar pickup is translated by the PDB™ into a low impedance balanced signal required by mixing consoles. Keyboards and line level signals - The PDB™ automatically balances and matches the line level outputs of modern electronic keyboards. If you are using a multiple keyboard setup and your keyboards are all plugged into a single instrument amplifier, the PDB™ can be used to replace individual direct boxes. Simply send the output of the instrument amplifier to the PDB™ and then to the console (instead of a separate DI box for each keyboard). DJ console output signals - DJ mixers often supply only an unbalanced –10dB signal. The PDB™ converts this signal to a balanced line level signal before it reaches the console, while providing a convenient method of connector transition with the capability to run long cables. Speaker level signals - The PDB’s ...
Buy It Now! For More Information
ART Phantom-1
ART Phantom-1 Connect a Phantom I between the speaker output and a mic input with phantom power on the mixer, then set the attenuation switch to 40dB. Connect a Phantom I between the signal source and a mic input with phantom power and set the ground switch to Lift. Connect a Phantom I between the source and a mic input with phantom power and set the Attenuator switch to 20dB. Features: Signal To Noise Ratio 100dB Input Level –10 to +40dB Output Level –10 to +2dB Input Connectors Dual 1/4 in, unbal. inputs are parallel Output Connectors XLR Balanced Frequency Response 1Hz – 50kHz Ground Lift Switch Input Attenuation Switchable signal padding: –20dB Phantom Power LED Indication when present Power 9 to 48V DC of phantom power Dimensions 3.75x2.875x1.5 inches (95mm x 74mm x 40mm) Weight 0.7lbs. (317g) Get Your ART Phantom-1 Today!
Buy It Now! For More Information
ART Phantom-2
ART Phantom-2 The ART Phantom II provides phantom power for one or two condenser microphones. It has a 3-way 12V/OFF/48V selector switch which lets you choose 48V for microphones rated at 24 to 48V, 12V for lower-voltage microphones or "OFF" to conserve battery life. Low-noise operation is featured in all modes. This is one handy box! The ARTcessories line includes direct boxes, headphone amplifiers, small mixers, mic cable combiner/splitters and much more. This line is designed to deliver solutions for a number of audio needs – like having phantom power, having one or two more mixing channels, testing cables, headphone processing, preamplification for microphones & turntables, and many more real-world applications. ART Phantom II Specifications: The Phantom II provides Phantom Power for one or two condenser mics. A three-way 12V/OFF/48V selector switch lets you choose 48V for mics rated at 24 to 48V, 12V for lower-voltage mics or OFF to conserve battery life. Power can be supplied by two 9V batteries (included) or an optional AC adapter. The power LED goes out when the unit is running on batteries and switched OFF, but remains on while an AC adapter is in use. Low-noise operation is featured in all modes Input Connectors: 2 x XLR female Output connectors: 2 x XLR male Required batteries: 2 x 9V Optional A...
Buy It Now! For More Information
ART PR8PRO
ART PR8PRO Regulates incoming AC line voltages to deliver clean and stable power to your system with the ART PR8PRO. Power regulation will give you optimum operation and longer life from your valuable equipment. Even as the incoming AC line varies from 97 to 137 volts, the PR8PRO maintains output voltage at any of the 8 rear AC outlets within 5 Volts of 117 Volts. It features extreme voltage shutdown protection, Advanced Power Filtering, and a fast acting breaker, protecting your system while the front panel LCD gives you a constant display of the line voltages (input and output). The PR8 PRO is designed to protect a wide range of equipment from sensitive vintage tube amplifiers to large displays or digital systems. Your equipment will sound and work better and live longer. ART PR8PRO Features: Maintains 117VAC (+/-5VAC) when AC input is between 97 and 137VAC Output In Regulation LED indication Extreme voltage shutdown if input >140V or <80V LCD AC line input and output voltage display Front panel unstitched and unregulated output 1800 Watt total power capacity Front panel master breaker and power switch EMI and RFI filtering Surge and Spike Protection Very low stray magnetic field leakage Multitap toroidial auto former design Get Your ART PR8PRO Today!
Buy It Now! For More Information
ART PROCHANNEL
ART PROCHANNEL The Pro Channel from ART is the latest offering from the world's most popular tube dynamics processing manufacturer. ART engineers have combined the world-renowned Pro MPA, Pro VLA, and Tube EQ into a single product - creating the world's best-sounding and most affordable professional recording channel. The Pro Channel features many new and exciting design enhancements to ART's pro and home studio staples, including the addition of a tube circuit to the compressor module. The Pro Channel allows you to select between ART's award winning optical/tube compressor or the coveted tube circuit (a design made popular by the sound of the old broadcast limiters - now costing thousands of dollars). The tube circuit is fast, fat and a bit aggressive, and is guaranteed to become a legend among compressors as has the Pro VLA. The four-band parametric equalizer has selectable Q for the two sweepable mid-bands. As with all design elements of the Pro Channel, these Q options were fine-tuned by some of the industry's top studio and live-sound engineers. Likewise, all new additions were made without compromise to the sound of the original designs (Pro MPA, Pro VLA, Tube EQ), which have become standards in professional studios and FOH rigs around the globe. The Pro Channel defines the term "channel strip." The Pro Channel is an impressive package fro...
Buy It Now! For More Information
ART ProMix
ART ProMix Insert a ProMIX between the mics and the mixer. Each mic channel on the ProMIX has both phantom power and low-frequency cut selectable via DIP switches plus a level control. The balanced XLR line output can be connected to a mic input on the mixer and headphones or a powered monitor can be connected to the Phone/Aux output. And if AC power is not available, the ProMIX runs on batteries as well. Specifications: Maximum Gain: +60dB Input Impedance: 600 ohms Maximum Input Level: -14dB Maximum Output Level: +14dB Output Impedance: 600 ohms Total Harmonic Distortion: 0.02% Low Cut: -3dB @ 100 Hz Clip Headroom: 3dB Output Phantom Power: 12V DC Power: 12V DC (adapter)/2x9V (batteries) Dimensions: 5.625" x 3.75" x 1.75" Weight: 1.5 lbs Get Your ART ProMix Today!
Buy It Now! For More Information
ART ProMix-3
ART ProMix-3 The ART ProMIX is a compact 3-channel microphone mixer designed as an easy, cost effective solution for mixers and preamps with minimal microphone inputs. The ProMIX features 3 microphone inputs with 3-pin XLR female connectors. The mixer is capable of supplying up to 18V phantom power to condenser microphones. A single balanced, XLR male mic-level output is provided. A 1/4" headphone output doubles as an alternate line level output. Low frequency cut off eliminates hun and rumble and level adjustment controls are located on each channel. ART ProMix-3
Buy It Now! For More Information
ART ProSplit
ART PROSPLIT The ProSplit provides one direct output and one transformer isolated output from a single microphone. Applications include sending the direct output to the main or Front-Of-House mixer, with the second isolated output being sent to a monitor or recording mixer. The direct output passes phantom power from the main mixer to the microphone for use with condenser microphones. The ProSplit includes a ground-lift switch on the isolated output to reduce noise due to ground loops between connected equipment. For versatility the ProSplit also features an attenuator pad switch on the input that can be used to alternately connect a preamplifier (line-level) signal to the two microphone-level ProSplit outputs. Get Your ART PROSPLIT Today!
Buy It Now! For More Information
ART PROVLAII
ART PROVLAII The Pro-VLA is a tube driven Vactrol®-based Compressor / Leveling amplifier designed to excel in any professional audio application, including tracking, mixing, mastering, live sound or broadcast situations. By using an opto-electronic design, (as opposed to a more typical VCA driven level detection circuit) the Pro-VLA II allows more compression to be added to an audio source with a more natural, musical sounding output and virtually transparent dynamic leveling. This VCA-less design coupled with a 12AT7 vacuum tube in the gain stage makes the Pro-VLA II the ideal dynamic control device for critical studio and live sound applications. Features: Vactrol Opto-Compression Design (no VCA) Mastering-Quality Audio Signal Path with Tube Gain Stage Enhanced Link Mode – While in stereo link mode, channel 1 level control acts as a master output level and channel 2 becomes a balance control between them, - optimizing the Pro-VLA II for use as a mastering tool Variable Threshold, Ratio & Output Controls LED Backlit VU Input/Output Level Metering LED Metering Indicates Both Average Level And Peak Hold Accurate Ten Segment LED Gain Reduction Metering +4dBu/-10dBV Mode Switch Optimizes Pro-VLA II For Interface With Professional OR Consumer Grade Components Active Balanced XLR And ¼-Inch Inputs & Outputs Toro...
Buy It Now! For More Information
ART PS4X4
ART PS4X4 The PS 4x4 features a backlit linear meter to monitor input voltage, which gives the user a familiar analog style readout when monitoring voltage from a power source.Additionally, the PS 4x4 has a backlit linear Ammeter showing Load Current in amperes. This additional meter gives an analog "real-world" look at how much power you are using ...hence the term "power station".While the associated voltmeter stays relatively stable and varies slightly with line voltage and house wiring, the ammeter varies much more, as power is consumed.For example, if the unit is in a rack with digital equipment and preamps, it may not vary a lot (even if you had 8 200 watt network computers hooked up, it would show if all are up and running). However, if it is in a rack with one or more power amps, the meter's indicator may be bouncing all around - and providing a great indication of output.The PS 4x4 also features ART's "4x4" distribution on the back of the unit -- four of the eight rear outputs are 1.25 inches apart. This allows the user to plug in wide power cables and multiple wall wart devices, and still have eight total power outlets to choose from.Built into the PS 4x4 is a surge and spike protection system, designed to protect powered equipment from harmful electric surges and spikes. The unit also has RFI and EMI filtering, a 15...
Buy It Now! For More Information
ART PS4x4PRO
ART PS4x4PRO Presenting the 4x4 PRO SERIES Power Distribution Systems from ART. Built on the foundation of the popular 4x4s, the PRO SERIES are durably constructed, reliable power conditioners for use in many applications. Wherever power management system is required, the 4x4 PRO SERIES provide the surge protection you need to keep your rack safe from unwanted disruption. All PRO SERIES models have an additional internal discrete module called APF™ (Advanced Power Filtering) which filters out digital and dimmer hash as well as any high frequency noise that is above the audio range. Some off-the-shelf add-on modules saturate and lose their filtering effectiveness as the load increases, but by using a high power discrete design we were able to create a filter that stays effective over the full operating range. By using both Common Mode and Differential Mode topologies in series for the filter design we are able to block virtually all of the unwanted noise that is between the AC line and ground, and also the two sides of the AC line. This has the additional benefit of reducing ground loop problems in your system. High frequency noise currents in particular are highly attenuated in both directions so that any line noise that could be generated by one of your components is not allowed to get back into your main A.C. wiring so if you use a number of PRO ...
Buy It Now! For More Information
ART PS8PRO
ART PS8PRO The PS8PRO gives you controlled power sequencing to 8 rear AC outlets. Every output is delayed by a fixed amount that is determined by the front panel Sequence Delay control. This allows you to control the power up and down sequence in a system to minimize turn-on transients and the damage that they may cause (For example: if you power on a mixer after the speakers you will get a loud pop and potentially damage your equipment). Sequencing power on also smoothes out inrush currents. A rear mounted Remote connector allows Remote switching, handy when you want to keep noisy or hot equipment in another room and control power remotely. The PS8 PRO is also a full-featured power conditioner with Advanced Power Filtering, fast acting breaker, EMI and RFI filtering, as well as surge and spike protection to protect your system. Additionally, a front panel LCD display gives you a constant read of AC line voltage and load current as well as a built in system clock. The PS8 PRO is designed to sequence and protect a wide range of equipment from sensitive tube preamps to powered speakers, large displays, or digital systems. Your equipment will sound and work better and live longer. ART PS8PRO Features: Adjustable sequence delay range from 0.5-2.0 seconds per output step 8 individually sequenced outputs with front panel LED indicators for each Rear mou...
Buy It Now! For More Information
ART PwrMix-1
ART PwrMix-1 There are occasions when a number of mono sources or a stereo source and/or instruments need to be mixed down into a mono signal. This might be a matter of inserting one or two keyboards plus a stereo tape or CD track into one mixer channel for PA or recording purposes or simply into an instrument amp or powered speaker. There can also be the need to mix the line outputs of two or more instrument amps into one mixer channel. Up to 4 high impedance mics can be mixed this way. (ie: Karaoke applications.) High impedance mics and electric instruments can be mixed this way for small band rehearsals. Two high-impedance mics and a stereo CD or tape can be mixed down. And if the mixer is passive, no AC power source is required. The Power MIX I features four channels of passive mixing facilities. All line-level sources can be mixed as well as Hi-Z microphones and most electric instruments. Features: All 1/4” connections Rotary level controls Input impedance: 47k ohms Output impedance: 12k ohms Insertion loss: 6dB (typical) Power: (Passive operation) Dimensions: 3.75 x 2.75 x 1.5 inches (90mm x 70mm x 40mm) Weight: 0.7 lbs. (317g) Get Your ART PwrMix-1 Today!
Buy It Now! For More Information
ART PwrMix-2
ART PwrMix-2 The need to mix recorded music with line-level signals can occur in a variety of situations. You might need to mix vocals and/or instrumentals from one mixer with recorded music, then send it all to one channel on a PA, broadcast or recording mixer. In another case, you might need to be addressing a sales group or an aerobics class through a wireless microphone while combining it with recorded music, all through powered speakers. In these and other cases, a very small, simple mixer like the Power MIX II is often the best solution. Specifications: Input Gain:32dB max (Ch.1) 20dB max (Ch.2) Input Impedance:10K ohms (Ch.1) 20K ohms (Ch.2) Input Connectors:1/4in Line In unbal. (Ch1) dual RCA Line In (Ch2) Output Connectors:1/4in Line/Headphones, Dual RCA line-level outputs Power Requirements:12V DC (Adapter included) Dimensions:3.75x2.75x1.5 inches (95mmx70mmx38mm) Weight:1.1lb (499g) Get Your ART PwrMix-2 Today!
Buy It Now! For More Information
ART SLA1
ART SLA1 The SLA-1 Studio Linear Amplifier is a robust yet compact power amplifier designed for studio and even lives applications. It has been designed and engineered to provide clean, quiet power and excellent sound with ultra-low noise and distortion. The SLA-1 is rated at 100 watts RMS/channel @ 8 ohms (130 watts RMS/channel @ 4 ohms and 260 watts/bridged Mono @ 8 ohms), with hum and noise >100dB, and has an input impedance of 22k ohm unbalanced (44k ohm balanced). It features a toroidial transformer, XLR & 1/4 in. inputs, ground lift switch, fan cooled design, power, clip, signal and protect LEDs, 1-rack unit spacing and a frequency response of 10 Hz to 40 kHz within 1dB. It also features an input sensitivity of 1V for rated power into 8 ohms, and silent Smart Fan cooling and custom convection heat radiating fins. The SLA-1 is perfect for professional, project and home studios. The SLA-1 is a powerful, compact amplifier, and its rugged, steel chassis is designed for years of durable and reliable use. Features: Bridged output power, 8 ohms: 260 watts RMS mono CMRR: >60dB (typical @1kHz) Dimensions: 1.75in H x 19.0in W x 9.5in D Frequency response: 10Hz to 40kHz, +/- .5dB Hum and noise: >100dB below clipping Power requirements: (USA) 120vac 60Hz 600 watts (max) Stereo output power, 4 ohms: 130 watts RMS per channel Stereo ou...
Buy It Now! For More Information
ART SLA2
ART SLA2 ART's latest amplifier stems from the success of their popular 100-watt SLA-1. For all of you power-hungry audio enthusiasts, ART presents to you the more powerful SLA-2. The SLA-2 is a studio linear power amp that delivers 200 watts of clean, clear power, and will help reproduce your mixes with near-pinpoint accuracy inside a single rack space. One of the top features on the SLA-2 is ART's Smart Fan technology. In addition to a standard cooling fan, the over-sized convection heat sinks located on each side of the SLA-2 silently directs heat flow outside the chassis. What makes the Smart Fan 'smart'? It's temperature-controlled variable-speed keeps the amp quiet and cool while performing at lower output. SmartFan kicks in only when the amp’s heat load rise creating an 'on demand' cooling system in warmer environments. ART has also included a tamper-proof faceplate for your fixed installations. Its long list of useful features measure up to an incredible value. The SLA-2 is perfect for pro, project and home studios. Features: Toroidal transformer 200 watts per channel @ 8 ohms 560 watts bridged mono @ 8 ohms 10 Hz -- 40 kHz within +/- .5 dB XLR, Euroblock & 1/4 in. inputs Includes tamper-proof faceplate SmartFan silent cooling system Low profile 1U rack-mountable Extremely low noise, discrete linear design All-steel ...
Buy It Now! For More Information
ART SLA4
ART SLA4 Offering superb sound quality, the ART SLA4 studio linear power amplifier delivers the clean power you need for any professional audio application including project or professional studio environments or commercial sound installations. The SLA4 is a true four-channel amplifier in a single rack-space that can be switched easily from Multi-channel, Stereo and Bridged Mono Modes. Separate mode switches allow you to bridge channels 1 and 2, or channels 3 and 4, or both channel pairs. This maximizes flexibility by allowing the amp to be configured for best utilization in 2, 3, or 4 channel applications. Designed for long-term reliability in any audio application, the SLA4's output is fully protected from short circuits. An ultrasonic network decouples RF from the output and helps keep the amplifier stable with reactive loads. The SLA4 is stable into loads as low as 2 ohms (stereo mode) or 4 ohms (bridged mode) making it ideal for virtually any installation application or complex system configuration. The SLA4 features SmartFan(TM), an advanced, thermal dependent fan assisted convection cooled system. The SmartFan system is dependent upon the internal ambient temperature of the unit, and runs at high or low levels depending on the amplifier's cooling needs. 1/4-inch TRS and Euroblock balanced inputs as well as multi-way output binding posts are ens...
Buy It Now! For More Information
ART SP4X4
ART SP4X4 The SP 4x4 features a backlit linear meter to monitor input voltage, which gives the user familiar analog style readout when monitoring voltage from a power source. The SP 4x4 also features ART's "4x4" distribution on the back of the unit -- four of the eight rear outputs are 1.25 inches apart. This allows the user to plug in wide power cables and multiple wall wart devices, and still have eight total power outlets to choose from. Built into the SP 4x4 is a surge and spike protection system, designed to protect powered equipment from harmful electric surges and spikes. The unit also has RFI and EMI filtering, a 15 amp breaker, and a total power capacity of 1800 watts. The SP 4x4 also features a front-located on/off power switch (which lights up when turned on), and a front-mounted circuit breaker reset switch. The rugged, all-steel chassis occupies 1U rack spaces and is intended for installation into standard 19" equipment racks. Applications for the SP 4x4 include Live Sound Systems/PA, Permanent or Fixed Installations, Church, Club and Practice PA Systems, DJ Sound Systems, Home and Project Recording Systems, and Monitor Systems. Get Your ART SP4X4 Today!
Buy It Now! For More Information
ART SP4X4PRO
ART SP4X4PRO Presenting the 4x4 PRO SERIES Power Distribution Systems from ART. Built on the foundation of the popular 4x4s, the PRO SERIES are durably constructed, reliable power conditioners for use in many applications. Wherever power management system is required, the 4x4 PRO SERIES provide the surge protection you need to keep your rack safe from unwanted disruption. All PRO SERIES models have an additional internal discrete module called APF (Advanced Power Filtering) which filters out digital and dimmer hash as well as any high frequency noise that is above the audio range. Some off-the-shelf add-on modules saturate and lose their filtering effectiveness as the load increases, but by using a high power discrete design we were able to create a filter that stays effective over the full operating range. By using both Common Mode and Differential Mode topologies in series for the filter design we are able to block virtually all of the unwanted noise that is between the AC line and ground, and also the two sides of the AC line. This has the additional benefit of reducing ground loop problems in your system. High frequency noise currents in particular are highly attenuated in both directions so that any line noise that could be generated by one of your components is not allowed to get back into your main A.C. wiring so if you use a number of PRO SERIES Po...
Buy It Now! For More Information
ART SplitComPro
ART SPLITCOMPRO Use the SPLITCom Pro to split or combine balanced low impedance microphone signals. As a splitter: The SPLITCom Pro provides one direct-coupled output and one isolated output from a single microphone. Applications include sending the direct output to the main or FOH mixer, and the second isolated output to a monitor or recording mixer. The MAIN MIC OUTPUT passes phantom power from the main mixer to the MAIN MIC INPUT for use with condenser microphones. Phantom power is blocked from passing to the ISOLATED MIC OUTPUT. As a combiner: The SPLITCom Pro provides one output from two microphone inputs. The PHASE switch can be used to invert the relative phase of the ISOLATED MIC INPUT. Applications include dual micing of percussion instruments, choirs, and instrument amplifiers. Phantom power passes through each output to their respective input, (MAIN to MAIN, ISOLATED to ISOLATED), however phantom power is blocked from passing between the MAIN and ISOLATED signal paths. Only the audio passes between the MAIN and ISOLATED signal paths (it is present on all inputs and outputs). Features: Low distortion with wide frequency response Two function in one box - combines and/or splits Phase invert switch for subtractive combining Galvanic Isolation to block phantom-power between channel Ground lift switch to reduce noise due...
Buy It Now! For More Information
|
ART SYNCGEN
ART SYNCGEN The ART SyncGen is a simple to use and inexpensive way to improve the sound of your digital recording gear and eliminate seemingly random pops and clicks resulting from synchronization timing errors between different pieces of equipment. Using a word-clock generator will centralize all of the timing, reducing accumulated timing errors between the individual units that make up a digital recording chain. You can drive either BNC word-clock inputs or coaxial S/PDIF inputs. This allows the SyncGen to work together with a wide variety of digital audio equipment. The ART SyncGen can also double as a system tester by telling you about the status of your BNC word-clock cables and terminations. You can see which pieces of gear are internally terminated, and if a cable is connected properly. A green indicator shows correct 75 Ohm termination. Red indicates an output that is shorted or over-terminated (too low of an impedance). When a termination LED is not illuminated at all, the output is either unconnected or not terminated properly, (open circuit or too high of an impedance). Features: Stable & Accurate Time-Base Reference 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz, 176 KHz, 192 KHz Sample Rates Four High-Current 5 Volt BNC Word-Clock Outputs Two "Zero Bit Digital Black" S/PDIF Outputs On Coaxial RCA Connectors LED Indicators M...
Buy It Now! For More Information
ART TUBEMP
ART TUBEMP The Tube MP is the world’s most popular external tube microphone preamp. Whether you’re working with a digital, computer or analog recording system, the Tube MP’s TEC award nominated design will allow you to obtain professional recording studio results at a fraction of the cost of comparable equipment. The hybrid design of the Tube MP allows it to add warmth and fatness to a signal while maintaining exceptionally low-noise and high quality. While its primary application is to be used with a microphone, the Tube MP is an exceptional direct box - impedance matching, amplifying and improving the sound of any instrument plugged into it. The usage of external mic/line preamps has become increasingly popular over the past several years. The Tube MP offers superior performance and sound quality to the “on-board” preamps found in today’s low-cost mixers and multi-trackers. It’s sound has been consistently favored over other products costing upwards to ten-times its price. Professional quality sound combined with professional features like: a hand-selected 12AX7a tube, phantom power and phase reverse are what have made the Tube MP a staple in thousands of studios worldwide. For a minimal investment, a Tube MP can provide the single largest improvement to the sound of your studio. Get Your ART TUBEMP Today!
Buy It Now! For More Information
ART TUBEMPPS
ART TUBEMPPS The Tube MP is the world's most popular external tube microphone preamp. Whether you're working with a digital, computer or analog recording system, the Tube MP's TEC award nominated design will allow you to obtain professional recording studio results at a fraction of the cost of comparable equipment. Now it's available in a portable version! The Tube MP ps employs ART's hybrid design that allows it to add warmth and fatness to a signal while maintaining exceptionally low-noise and high quality. While its primary application is to be used with a microphone, the Tube MP ps is an exceptional direct box - impedance matching, amplifying, and improving the sound of any instrument plugged into it. The usage of external mic/line preamps has become increasingly popular over the past several years. The Tube MP ps offer superior performance and sound quality to the "onboard" preamps found in many low-cost mixers and multi-trackers. Its sound has been consistently favored over other products costing upwards to ten times its price. The Tube MP ps offers professional quality sound combined with pro features like a hand-selected 12AX7a tube, phantom power, and phase reverse. For a minimal investment, Tube MP Ps can provide the single largest improvement to the sound of your studio. ART Tube MP Ps Portable Preamp/DI Features: Extremely low noise...
Buy It Now! For More Information
ART TUBEMPSTV3
ART TUBEMPSTV3 The Tube MP Studio V3 features ART's new V3 (Variable Valve Voicing) Technology. V3 provides optimized reference points to begin the recording process. The V3 presets were created and fine-tuned by some of the industry's top studio and live-sound engineers, along with ART's accomplished engineering department. V3 allows you to select between a multitude of preamp settings designed for guitars (electric and acoustic), keyboards, bass guitars, drums, vocals and more. V3 gives you incredible presets for every instrument you record, so all your recordings will sound professional. Need to tweak the presets? Go right ahead -- hone your perfect tone! That's the power of V3. V3 also incorporates ART's OPL (Output Protection Limiter), which precisely and accurately controls and maintains the output peak signal. The OPL circuitry is crucial in protecting the next link in a signal chain - such as a hard-disk recording system or a sound card. While it's primary application is to be used with a microphone, the Tube MP Studio V3 can also function as a direct box - impedance matching, amplifying and improving the sound of any instrument plugged into it. The design of the Tube MP Studio V3 allows it to add warmth and fatness to a signal while maintaining low-noise. The Tube MP Studio V3 features all the tone and functionality of its predecessor, the Tube ...
Buy It Now! For More Information
ART TUBEMPUSB
ART TUBEMPUSB PME 153 is back with a cool mic preamp… The ART Tube MP series is one of the best selling, low cost preamps around …and, it fits in the palm of your hand. The small size, extremely low price coupled with the promise of “tube warmth”, made the MP series an instant hit. Studio1A recently acquired a Tube MP with a twist. The new Tube MP USB offers USB connectivity, phantom power, a limiter and, of course, the 12AX7 tube. Get Your ART TUBEMPUSB Today!
Buy It Now! For More Information
ART TUBEPAC
ART TUBEPAC The Tube PAC from ART is a combination of the worlds most popular tube mic/line preamplifier and optical tube compressor. ART engineers took the Tube MP and Tube Compressor and combined them into a single convenient aircraft-quality, extruded aluminum chassis. This new table-top design allows for easy placement in the studio or on the stage with immediate access to all the controls, features, and metering. In addition to being a tremendous vocal and instrument preamplifier and compressor package, this may well be the ultimate in tube direct boxes! The mic/line preamplifier stage is that of the TEC nominated Tube MPa time (and studio) proven design. It provides over 70dB of gain, +48v phantom power, phase reversal, and is capable of warming up any instrument or microphone. LED level indicators are provided to monitor the output of a 12AX7a tube for harmonic content. The input level controls allow you to dial in the desired amount of tube warmth and then independently set the output level from the compressor circuitry. The tube compressor is a VCA-less, optical design similar to that of the classic tube compressors. Its ultra-musical sound is ideal for voice and instrument applications. Threshold, compression/limiting ratios, adjustable release times, bypass, gain reduction metering, and output gain controls are provided. Tube PAC - Tube Mic Pre...
Buy It Now! For More Information
ART USBDUALPRE
ART USBDUALPRE The USB Dual Pre is a full-featured high quality dual portable preamplifier and computer interface packed into a compact rugged case. It is designed to work over a wide variety of applications from remote field recording to desktop/studio tracking. Each of the two low noise input channels has up to 48 dB of clean gain with signal present and clip LED indicators. Inputs can be either XLR balanced or 1/4-inch TRS. Each of the 1/4-inch TRS outputs is buffered low impedance balanced. The USB Dual Pre can be externally powered from the mains via a supplied 12 Volt DC adapter, or from an internal 9 Volt battery, or from the USB bus itself, or any combination of these power sources. When running off of the battery alone, you should get in excess of 50 hours of operation when phantom power is off. Battery life drops to around 20 hours (depending on microphone) when phantom powering from the battery alone (still enough time to get through a session). The built-in low noise +48 Volt phantom power supply allows you to power up to 2 microphones as well as the preamplifier when running from any power sources including the USB bus. For monitoring, an 1/8-inch TRS mini headphone jack with level and monitor mix controls on the rear allow for latency free local monitoring of the inputs while recording as well as playback monitoring of the USB bus. The monito...
Buy It Now! For More Information
ART USBPhonoV2
ART USBPhonoV2 The USBPhonoPlus v2 is the ideal low cost interface solution for transferring any analog or digital audio source, including a turntable into a computer via standard USB connection. Building on the success of the 2 previous iterations, the ARTcessories DeeJayPre and the USBPhonoPlus, the USBPhonoPlus v2 adds more convenient pre or post monitor source selection and a variable headphone level control to the already successful low noise RIAA standard A/D interface package. The USBPhonoPlus v2 is of course fully compliant with the USB 1.1 specification and uses USB adaptive mode for playback and USB asynchronous mode for audio recording applications. Optical TOSLINK inputs and outputs as well as S/PDIF inputs allow the USBPhonoPlus v2 to act as a convenient digital audio to USB interface as well standard line level analog audio / USB conversion tool. Designed to work with the USB audio device drivers in PC Windows 98SE/ME/2000/XP/Vista, Mac OS9.1 or greater (with native USB support) or any OS-X based system, the USBPhonoPlus v2 requires no additional drivers. Housed in an all aluminum black anodized case, the USBPhonoPlus v2 can be powered by either an external power supply or directly from a PC based USB host port for added convenience. Now shipping with the USBPhonoPlus v2 is a CD-ROM which contains a complete copy of the audio recording uti...
Buy It Now! For More Information
ART VOICECHANNEL
ART VOICECHANNEL The ART Voice Channel™ is the answer to your recording and computer audio interface needs. Built to provide the ideal all-in-one input solution for analog or digital recording, the ART Voice Channel is a true second-generation discrete Class-A microphone preamp capable of providing clean quiet gain while maintaining incredible transparency. An integrated fully variable powerful dynamics processor subtly controls transients and noise of the most demanding sources while the Voice Channel’s semi-parametric EQ offers wide tune-ability. For added versatility the EQ can be patched before OR after the dynamics processor while separate insertion jacks allow you quick quiet in-line connectivity to external signal processing gear immediately after the Mic preamp, before the EQ and dynamics processor in the signal path. Another insert patch point exists just before the A/D converters. Choose between a wide range of outputs including balanced analog output, 44.1 KHz to 192 KHz AES/EBU, S/PDIF, ADAT and USB. Both analog and digital meters provide a detailed indication of audio levels. Features: Ideal input solution for any recording application. Tube Microphone Preamplifier with Selectable plate Voltage and Variable Input Impedance Exceptional warmth and definition from proven ART Tube Preamp design Smooth musical sounding dynam...
Buy It Now! For More Information
ART XDirect
ART XDIRECT The Xdirect is a high quality interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input. The high impedance single-ended 1/4" and XLR inputs are buffered and converted, by very low noise active electronics, into an isolated balanced low impedance signal source. The Xdirect has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output. This gives the Xdirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments. The Input Attenuator switches allow for a wide range of signal levels and the Input Link jack allows for tapping off of your signal chain. The Ground Lift switch lets you totally separate the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing hum and ground-loop noise. What further sets the Xdirect apart from other "Active DI" boxes are its extended features and versatility? We have added a switch able low pass Filter that cuts out all very high frequency interference. This Bessel filter on the input is placed out of the audio range and is primarily intended to reduce radio frequency interference before it gets into the main system. The filter is also very effective in reducing ...
Buy It Now! For More Information
ART XL321
ART XL321 The XL231 has been designed and engineered to exceed extremely high standards for design specification and audio performance. This flagship EQ is precise and flexible, with the quality components and innovative features necessary for top-level professional audio performance. The XL231 filter sets utilize precision 1% resistors and 2% capacitors. The active gain elements used throughout are all ultra low noise, and low distortion, resulting in a total dynamic range specification of >=123dB, thereby making these equalizers perfect for all applications where precision processing and silent operation are of the utmost priority. Rugged construction and solid audio performance make these equalizers well suited for touring live-sound systems as well as for fixed installations where their detachable Euroblock interface connectors come in handy. The XL231 features ART's exclusive two knob Low and High Trim filter set. Each control applies a gentle upward or downward slope to the overall frequency response. The Low and High Trim controls affect frequencies below and above 1KHz, respectively. These controls are extremely useful for making subtle adjustments to the overall sound after the room has been "rung" out for feedback nodes. You can easily fine tune the lows and highs as they change over time resulting from changes in audience size, and/o...
Buy It Now! For More Information
ART ZDirect
ART ZDirect The Zdirect is a high quality totally passive interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input thru a high performance audio isolation transformer. The high impedance single-ended 1/4" input is converted by the transformer into an isolated balanced low impedance signal source. The Zdirect's audio transformer has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output. This gives the Zdirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments. The Input Attenuator switches allow for a wide range of signal levels and the Input Thru jack allows for tapping off of your signal chain. The Ground Lift switch lets you totally separate the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing hum and ground-loop noise. What further sets the Zdirect apart from other "DI" boxes are its extended features and versatility. ART has added a switchable low pass filter that cuts out all very high frequency interference. This Bessel filter on the output is placed out of the audio range and is primarily intended to reduce radio frequency interference before it gets into the main system. The filte...
Buy It Now! For More Information
Ibanez ART100
"Ibanez ART100 Ibanez ART100 Description: For over 30 years, the classic Artist design has provided a real, high quality alternative to ""the other famous mahogany double humbucker."" The more recent ARX and ART single cutaway offer new, striking finishes, active pickups and more modern variations on the set-neck Artist theme at unprecedented low prices. Pickups: Bridge Pickup Name: ARTCORE 2-S Model No: ACH2-S Construction: Humbucking Magnet: Ceramic Description: Tight tone with added treble. Bridge version of ACH1-S. Neck Pickup Name: ARTCORE 1-S Model No: ACH1-S Construction: Humbucking Magnet: Ceramic Description: Tight and trebly tone. Neck Dimensions: Scale/Length 628mm/24.75"" a: Width at Nut 43mm b: Width Last Fret 58.5mm c: Thickness 1st Fret 20mm d: Thickness 12th Fret 22.5mm Radius 305mm Ibanez ART100 Specifications: Neck Material: Mahogany Neck Type: ART set-in Body: Mahogany body Frets: Medium frets Fingerboard: Bound Rosewood Inlay: ART special on 12th fret inlay Bridge: Gibraltar III bridge NeckPU: ACH1-S BridgePU: ACH2-S HW Color: CH Finishes: TCR, BK, SV, WH Get your Ibanez ART100 today!"
Buy It Now! For More Information
Ibanez ART100L
"Ibanez ART100L Ibanez ART100L Description: For over 30 years, the classic Artist design has provided a real, high quality alternative to ""the other famous mahogany double humbucker."" The more recent ARX and ART single cutaway offer new, striking finishes, active pickups and more modern variations on the set-neck Artist theme at unprecedented low prices. Pickups: Bridge Pickup Name: ARTCORE 2-S Model No: ACH2-S Construction: Humbucking Magnet: Ceramic Description: Tight tone with added treble. Bridge version of ACH1-S. Neck Pickup Name: ARTCORE 1-S Model No: ACH1-S Construction: Humbucking Magnet: Ceramic Description: Tight and trebly tone. Neck Dimensions: Scale/Length 628mm/24.75"" a: Width at Nut 43mm b: Width Last Fret 58.5mm c: Thickness 1st Fret 20mm d: Thickness 12th Fret 22.5mm Radius 305mm Ibanez ART100L Specifications: Neck Material: Mahogany Neck Type: ART set-in Body: Mahogany body Frets: Medium frets Fingerboard: Bound Rosewood Inlay: ART special on 12th fret inlay Bridge: Gibraltar III bridge NeckPU: ACH1-S BridgePU: ACH2-S HW Color: CH Finishes: BK Get your Ibanez ART100L today!"
Buy It Now! For More Information
Ibanez ART300
"Ibanez ART300 Ibanez ART300 Description: New IBZ Lo-Z active pickups on the ART300BNC deliver high-output and only require two AA batteries. The ART300BNC's 24.75"" scale mahogany ART set-in neck increases neck-to-body sustain and tone. Pickups: Bridge Pickup Name: LoZ1-B Model No: LZ1-B Construction: Humbucking Magnet: Ceramic Description: High output yet low noise, active pickup operated by AA batteries (3 volts). Neck Pickup Name: LoZ1-N Model No: LZ1-N Construction: Humbucking Magnet: Ceramic Description: High output yet low noise, active pickup operated by AA batteries (3 volts). Neck Dimensions: Scale/Length 628mm/24.75"" a: Width at Nut 43mm b: Width Last Fret 58.5mm c: Thickness 1st Fret 20mm d: Thickness 12th Fret 22.5mm Radius 305mm Ibanez ART300 Specifications: Neck Material: Mahogany Neck Type: ART set-in Body: Mahogany body/ Scalloped Maple top Frets: Medium frets Fingerboard: Bound Rosewood Inlay: Diamond inlay Bridge: Gibraltar III bridge NeckPU: LoZ1-N BridgePU: LoZ1-B HW Color: CK Finishes: GRC, BKC, BNC Get your Ibanez ART300 today!"
Buy It Now! For More Information
Ibanez ART320
"Ibanez ART320 Ibanez ART320 Description: For over 30 years, the classic Artist design has provided a real, high quality alternative to ""the other famous mahogany double humbucker."" The more recent ARX and ART single cutaway offer new, striking finishes, active pickups and more modern variations on the set-neck Artist theme at unprecedented low prices. Pickups: Bridge Pickup Name: LoZ1-B Model No: LZ1-B Construction: Humbucking Magnet: Ceramic Description: High output yet low noise, active pickup operated by AA batteries (3 volts). Neck Pickup Name: LoZ1-N Model No: LZ1-N Construction: Humbucking Magnet: Ceramic Description: High output yet low noise, active pickup operated by AA batteries (3 volts). Neck Dimensions: Scale/Length 628mm/24.75"" a: Width at Nut 43mm b: Width Last Fret 58.5mm c: Thickness 1st Fret 20mm d: Thickness 12th Fret 22.5mm Radius 305mm Ibanez ART320 Specifications: Neck Material: Mahogany Neck Type: ART set-in Body: Mahogany body/ Flamed Maple top Frets: Medium frets Fingerboard: Bound Rosewood Inlay: Diamond inlay Bridge: Gibraltar III bridge NeckPU: LoZ1-N BridgePU: LoZ1-B HW Color: CK Finishes: BB, BLS Get your Ibanez ART320 today!"
Buy It Now! For More Information
Ibanez ART420
"Ibanez ART420 Ibanez ART420 Description: For over 30 years, the classic Artist design has provided a real, high quality alternative to ""the other famous mahogany double humbucker."" The more recent ARX and ART single cutaway offer new, striking finishes, active pickups and more modern variations on the set-neck Artist theme at unprecedented low prices. Pickups: Bridge Pickup Name: LoZ1-B Model No: LZ1-B Construction: Humbucking Magnet: Ceramic Description: High output yet low noise, active pickup operated by AA batteries (3 volts). Neck Pickup Name: LoZ1-N Model No: LZ1-N Construction: Humbucking Magnet: Ceramic Description: High output yet low noise, active pickup operated by AA batteries (3 volts). Neck Dimensions: Scale/Length 628mm/24.75"" a: Width at Nut 43mm b: Width Last Fret 58.5mm c: Thickness 1st Fret 20mm d: Thickness 12th Fret 22.5mm Radius 305mm Ibanez ART420 Specifications: Neck Material: Mahogany Neck Type: ART set-in Body: Mahogany body/ Spalted Maple top Frets: Medium frets Fingerboard: Bound Rosewood Inlay: Diamond inlay Bridge: Gibraltar III bridge NeckPU: LoZ1-N BridgePU: LoZ1-B HW Color: CK Finishes: HAM Get your Ibanez ART420 today!"
Buy It Now! For More Information
Ibanez ARTB100
"Ibanez ARTB100 Ibanez ARTB100 Description: The classic looks of the ARTB100 are enhanced by an arched top and refined body binding. The ARTB100 features a bound neck and headstock for a classic, streamlined look. The ARTB100 features metal-covered IBZ pickups that boast clear and pronounced tone and massive low-end. The ARTB100's 30"" scale set-in neck delivers more neck-to-body resonance and massive low-end tone. Pickups: Bridge Pickup Name: ARTCORE Model No: ACHB-B2 Construction: Humbucking/Passive Magnet: Ceramic Description: Warm classic tone with added output. Neck Pickup Name: ARTCORE Model No: ACHB-N2 Construction: Humbucking/Passive Magnet: Ceramic Description: Warm classic tone with added output. Neck Dimensions: Scale/Length 770mm/30.3"" a: Width at Nut 42mm b: Width Last Fret 63mm c: Thickness 1st Fret 21.5mm d: Thickness 12th Fret 24.5mm Radius 305mm Ibanez ARTB100 Specifications: Neck Material: 3pc Maple/ Mahogany Neck Type: ARTB4 set-in Body: Mahogany body Frets: Medium frets Fingerboard: Bound Rosewood Inlay: Pearl dot inlay Bridge: Gibraltar III Bass bridge NeckPU: ACHB-N2 BridgePU: ACHB-B2 HW Color: CH Finishes: BK, WH Get your Ibanez ARTB100 today!"
Buy It Now! For More Information
Dell Arte DG-AD1
"Dell Arte DG-AD1 Dell Arte DG-AD1 Description: Few guitarists today can approach the colossal technique and fiery musical stylings of Angelo Debarre. Dell'Arte proudly brings you the signature model that meets the virtuoso's specifications. This model has a slightly larger Favino-style body that many players believe contributes an extra measure of tone and volume. The guitar also features a solid spruce top, mahogany neck, a rosewood fretboard, a mustache bridge and a gold-plated tailpiece with an engraving of Debarre's signature. Angelo Debarre, born in St. Denis, France, started playing guitar at the age of 8. He was brought up by a family in touch with the manouche (gypsy) tradition, where music is an essential part of life. He founded his first group, ""The Angelo Debarre Quintet"" in 1984, and began touring the world with gypsy musicians. Since then, he has garnered acclaim throughout the world for his guitar playing and complex compositions. For Debarre, Django Reinhardt's music never loses the dynamism and richness of the past. This Dell'Arte model reflects his love and appreciation for the art of gypsy jazz. Dell Arte DG-AD1 Specifications: Angelo Debarre Signature Model Top: Solid Spruce Back & Sides: Maple Body Feature: Horizontal Cutaway Fretboard: Rosewood Neck: Mahogany Headstock Inlay: Dell'Arte M.O.P. Binding: Rosewood Purfling: Debarre ""Rope"" Herring...
Buy It Now! For More Information
Dell Arte DG-H1
"Dell Arte DG-H1 Dell Arte DG-H1 Description: The Hommage features a dramatic D-shaped soundhole, a signature of the earliest Selmer/Maccaferri-style guitars. This unique model has a solid spruce top, rosewood back and sides, a maple neck, a rosewood mustache bridge, a nickel-plated Maccaferri-style tailpiece and a Favino-style rosette. One modern feature that greatly improves playability is the neck/body joint at the 14th fret. The D-hole on this guitar provides great projection and the rosewood fretboard provides incredible playability for fast-paced rhythm playing. Dell Arte DG-H1 Specifications: Hommage Model Top: Solid Spruce Back & Sides: Rosewood Body Feature: Horizontal Cutaway Fretboard: Rosewood Neck: Maple Headstock Inlay: Dell'Arte M.O.P. Binding: Ebonized Wood Purfling: Wood Soundhole: D-Shaped Rosette: Favino-style Tailpiece: Maccaferri-Style Tailpiece Material: Brass Bridge, Mustache: Rosewood Tuners: Nickel-Plated Dell'Arte Truss Rod: Fully Adjustable Scale Length: 26.4"" Nut Width: 1-13/16"" (46mm) Nut Material: Bone Frets: 0 Fret + 21 Finish: Thin Gloss Item: DG-H1 Get your Dell Arte DG-H1 today!"
Buy It Now! For More Information
Dell Arte DG-H2
"Dell Arte DG-H2 Dell Arte DG-H2 Description: The Hommage features a dramatic D-shaped soundhole, a signature of the earliest Selmer/Maccaferri-style guitars. This unique model has a solid spruce top, rosewood back and sides, a maple neck, a rosewood mustache bridge, a nickel-plated Maccaferri-style tailpiece and a Favino-style rosette. One modern feature that greatly improves playability is the neck/body joint at the 14th fret. The D-hole on this guitar provides great projection and the rosewood fretboard provides incredible playability for fast-paced rhythm playing. Dell Arte DG-H2 Specifications: Solid Engelmann Spruce Top Rosewood Back & Sides Large Favino-Style Body Rock Maple Neck Rosewood Fretboard & Mustache Bridge Gold-Plated Maccaferri-Style Tailpiece Grover tuners Oval Soundhole with Favino-Style Rosette Scale Length: 26.4"" Get your Dell Arte DG-H2 today!"
Buy It Now! For More Information
Dell Arte DG-P1
"Dell Arte DG-P1 Dell Arte DG-P1 Description: With the original Selmer and Maccaferri guitars reaching astronomical collectors' prices, Dell'Arte has answered the call to players with accurate vintage replicas. The Pigalle has a solid spruce top, rosewood back and sides, a mahogany neck, a rosewood fretboard and mustache bridge, a brass Maccaferri-style tailpiece and an oval-hole soundhole with a Selmer-style rosette. This Django-style model is designed for lead playing and will please anyone who's passionate about gypsy jazz. Dell Arte DG-P1 Specifications: Pigalle Model Top: Solid Spruce Back & Sides: Rosewood Body Feature: Horizontal Cutaway Fretboard: Rosewood Neck: Mahogany Headstock Inlay: Dell'Arte M.O.P. Binding: Wood Purfling: Wood Soundhole: Oval Rosette: Selmer-style Tailpiece: Maccaferri-Style Tailpiece Material: Brass Bridge, Mustache: Rosewood Tuners: Nickel-Plated Dell'Arte Truss Rod: Fully Adjustable Scale Length: 26.4"" Nut Width: 1-3/4"" (45mm) Nut Material: Bone Frets: 0 Fret + 21 Finish: Thin Gloss Item: DG-P1 Get your Dell Arte DG-P1 today!"
Buy It Now! For More Information
Gretsch Artist DN Series Straps
Gretsch Artist DN Series Straps Never before has a guitar strap been able to express the soul of Gretsch guitarists like the Gretsch Artist DN Series Straps!! For years, artist Dave Newman has developed a cult following through his spirited collages and instantly recognizable style. Now, in this series of straps, Newman's passion for iconic Gretsch guitars captures the soul of various Gretsch personalitites. Designs: Humdinger, Wanted, Ethyl, Beautie, & Ride 'em Get Your Gretsch Artist DN Series Straps Today!
Buy It Now! For More Information
Hohner Artist Elite
Hohner Artist Elite This guitar is a re-issue of a Hohner instrument from the 1970's, made popular in film and on recordings, and is a symbol of Hohner quality for more than 25 years. Special order, allow 2 weeks to 3 months. Call or email for current wait. Specifications: Swamp Ash Body Flamed Maple Top and Back Maple Neck with Maple fingerboard Dual Hand-wound Single-coil Haussel Pickups Unique Leopard-print "Bridge-guard" and Pick-guard Fixed Start-style tailpiece Strung through body Finish: Natural Get Your Hohner Artist Elite Today!
Buy It Now! For More Information
Parker Fly Artist Vibrato
"Parker Fly Artist Vibrato - Color Shown - Butterscotch Parker Fly Artist Vibrato Description: Carved Sitka Spruce body, Basswood neck RFAVBS, Fly Artist Vibrato, Butterscotch Crafted by master builders, each model of the Parker Select Series has a unique feature set, making these some of the most exclusive and desirable guitars available. This super-versatile Fly is ready for any kind of music from metal to soft acoustic. Ultralightweight Sitka spruce body. Basswood neck with carbon/glass fingerboard. Precision cast aluminum vibrato bridge. Brushed black Sperzel locking tuners. 2 custom DiMarzio humbuckers and a 6-element Fishman piezo system. Split stereo or summed mono output. 3-way mag/piezo switch. 3-way mag selector switch (neck humbucker inside coils of both in parallel and bridge humbucker). Transparent butterscotch polyurethane finish. Includes case and cable. Parker Fly Artist Vibrato Features: Carved Sitka Spruce body with Basswood neck Parker custom-cast aluminum vibrato bridge, stainless steel saddles DiMarzio custom wound pickups 3-way mag pickup selection with push-pull coil tap Custom Fishman piezos and stereo voltage-doubled pre-amp Custom Parker vibrato system 4 1/2 lbs Parker Fly Artist Vibrato Specifications: Tones / Sounds: Gigantic lush bottom end; new levels of velvet crunch. Body Wood Sitka Spruce Construction Solid one piece ...
Buy It Now! For More Information
MTD Kingston Artist Series 5 String
MTD Kingston Artist Series 5 String The MTD Kingston Artist's are available in 34" scale 4 string or 35" 5 string models. All basses feature a medium weight, ergonomically carved Basswood body and a bolt-on Eastern hard rock Maple neck. Kingston Artist's are supplied with exposed-pole MTD MM style alnico humbucking pickups and have active electronics. The hardware includes a custom made MTD bridge and tuners in black. All Kingston basses are delivered with MTD strings. The 24 fret fingerboards come in Maple gloss, Rosewood, and a lined Ebonol fretless. All fretted basses utilize the Buzz Feiten Tuning System. Available colors for the Artist are Translucent Blue, Translucent Red, and Amber. Left-handed basses are offered with the same options. Specifications: 35" scale 5 string 24 medium jumbo frets 4Zero fret 1 3/4" wide, 5 string MTD bridge, 3/4" (19mm) spacing One-piece neck w/satin polyester finish Carved basswood body (figured maple top option) Four controls, volume plus 3 band EQMTD exposed pole alnico MM pickups Shielded electronics compartment Controls: Volume and Tone Color options: Translucent Blue, Translucent Cherry, Amber Get Your MTD Kingston Artist Series 5 String Today!
Buy It Now! For More Information
MTD Kingston Artist Series 4 String
MTD Kingston Artist Series 4 String The MTD Kingston Artist's are available in 34" scale 4 string or 35" 5 string models. All basses feature a medium weight, ergonomically carved Basswood body and a bolt-on Eastern hard rock Maple neck. Kingston Artist's are supplied with exposed-pole MTD MM style alnico humbucking pickups and have active electronics. The hardware includes a custom made MTD bridge and tuners in black. All Kingston basses are delivered with MTD strings. The 24 fret fingerboards come in Maple gloss, Rosewood, and a lined Ebonol fretless. All fretted basses utilize the Buzz Feiten Tuning System. Available colors for the Artist are Translucent Blue, Translucent Red, and Amber. Left-handed basses are offered with the same options. Specifications: 34" scale 4 string 35" scale 5 string 24 medium jumbo frets Zero fret 1 1/2" wide, 4 string Zero fret 1 3/4" wide, 5 string MTD bridge, 3/4" (19mm) spacing One-piece neck w/satin polyester finish Carved basswood body (figured maple top option) Four controls, volume plus 3 band EQMTD exposed pole alnico MM pickups Shielded electronics compartment Controls: Volume and Tone Color options: Translucent Blue, Translucent Cherry, Amber Get Your MTD Kingston Artist Series 4 String Today!
Buy It Now! For More Information
Vocopro RECORDING ARTIST-300
Vocopro RECORDING ARTIST-300 Vocopro RECORDING ARTIST-300 Description: Professional Recording System Imagine a professional recording system with superior sound quality that is extremely affordable and easy to operate. Whether you are recording your demo CD for record deals or just for fun, VocoPro's Recording Artist Series has you covered. They range from a full-blown, club-ready 500W recording studio system to a stand-alone Professional CD Recorder and player*. Each Recording Series system includes a CDR-1000 PRO which lets you record live performances directly onto CD without a computer and play in standard CD players. Vocopro RECORDING ARTIST-300 Features: 1 DA-1055 PRO Professional 6 Mic Mixer 1 CDR-1000 PRO Professional Single Space CD Recorder/Player 1 DVX-880 Digital Karaoke Player 1 RC-6 Carpet Road Case w/Casters 1 Pair PV-420 Powered Vocal Speakers 1 Pair SS-88 Speaker Stands 2 MARK-CV1 Professional Microphones Shipping Weight: (6) Boxes totalling 165 lbs Get your Vocopro RECORDING ARTIST-300 today!
Buy It Now! For More Information
Vocopro RECORDING ARTIST-500
Vocopro RECORDING ARTIST-500 Vocopro RECORDING ARTIST-500 Description: 500W Professional Recording Studio System Imagine a professional recording system with superior sound quality that is extremely affordable and easy to operate. Whether you are recording your demo CD for record deals or just for fun, VocoPro's Recording Artist Series has you covered. They range from a full-blown, club-ready 500W recording studio system to a stand-alone Professional CD Recorder and player*. Each Recording Series system includes a CDR-1000 PRO which lets you record live performances directly onto CD without a computer and play in standard CD players. Vocopro RECORDING ARTIST-500 Features: 1 DA-1055 PRO Professional 6 Mic Mixer 1 AVC-800 Automatic Volume Control with Sonic Enhancer 1 CDR-1000 PRO Professional Single Space CD Recorder/Player 1 DVX-880 Digital Karaoke Player 1 RC-6 Carpet Road Case w/Casters 1 Pair PV-420 Powered Vocal Speakers 1 Pair SS-88 Speaker Stands 1 STUDIO-C1 Professional Microphone Package including SM-C1 Suspension Shock Mount, & MP-43 Boom Mic Stand 2 MARK-CV1 Professional Microphones Shipping Weight: (6) Boxes totalling 185 lbs Get your Vocopro RECORDING ARTIST-500 today!
Buy It Now! For More Information
BC Rich Dark Arts Warlock
"BC Rich Dark Arts Warlock -Shown in Blood Color Buy Today & We'll Throw In The Following Free Gifts: Korg GA-30 Tuner + BC Rich Gig Bag This is a limited time offer so please act quickly! This warlock offers a unique Arched Top, neck through construction. There is black hardware, string through body construction over a tune-o-matic style bridge, and 2 high output direct mounted humbucker pickups. This Dark Arts Warlock is offered in Blood Red and Onyx Glossy Black. B.C. Rich is known as one of the pioneers in Neck Through construction. They utilize it on many of their guitars, because it provides the best possible sustain, resonance, comfort and access to higher frets. Neck-through has long been considered the premium construction method for high end guitars. This construction starts with a long piece (or pieces) of premium North American maple. That piece runs from the tip of the headstock to the strap button on the opposite end of the guitar. This means that the headstock, fingerboard, pickups and bridge all are mounted to this single sound foundation. Sonically it is a difference you can hear. The neck-through construction also allows us to cut away more of the body and neck at the neck joint which provides comfort that no bolt-on or set-neck could offer. You will find the neck through feature on all of our top of the line B.C. Rich models. B.C. Rich designed their BD...
Buy It Now! For More Information
Digidesign Synchro Arts VocALign Project
"Digidesign Synchro Arts VocAlign Project Instantly Time-Align Vocals, Dialog, or Instruments in Pro Tools VocALign's unique and legendary ability to time-align one audio signal automatically to another gives audio editors a powerful tool for a multitude of creative applications. Music - Tighten up backing vocals, lead vocals or instrumental performances. Re-create a ""live"" vocal's timing. ADR - Lip-sync replacement dialog instantly. Works with different voices and noisy guide tracks. VocALign reduces the need to re-record performers and drastically reduces editing time. Digidesign Synchro Arts VocAlign Project Features: AudioSuite plug-in with simple-to-use interface Micro-edits the replacement audio without changing pitch High-quality audio processing Supports Pro Tools-HD and Pro Tools version 5.0 and higher software Get Your Digidesign Synchro Arts VocALign Project Today!"
Buy It Now! For More Information
Arturia Minimoog V
Arturia Minimoog V
Buy It Now! For More Information
Arturia Moog Mod V2
Arturia Moog Mod V2 Description Test Description
Buy It Now! For More Information
Roland ARX-01
"Roland ARX-01 Roland ARX-01 Description: SuperNATURAL™ Expansion Board ""Drums"" World's first Expansion Board featuring SuperNATURAL™ technology The ARX series Expansion Board is powered by Roland's proprietary SuperNATURAL™ sound technology for organic, emotional expression. Optimized effects and custom graphic interfaces are exclusive to the ARX series. The ARX allows you to create unique instruments with the highest-quality sounds and organic control. The ARX-01 Drums Expansion Board is a music-production dream. Thanks to its SuperNATURAL voice engine, you have complete control of the elements of each drum, such as shell depth and muffling. Once each drum is crafted the way you want, you can further refine it with the built-in compressor/EQ, reverb, powerful multieffects, and an onboard mixer for adjusting the volume and pan position. Roland ARX-01 Features: More than just new sounds, you can create dream kits from the ground up. With 24-channel mixing for complete control ARX-01 lets you tune each of the elements of the kit, and specify shell depth and cymbal size, and muffling amount. And, just as if you were recording, you can change the mic position. The graphic icons make editing fast and easy. Just like being in a recording studio, the built-in 24-channel mixer provides detailed control over volume, panning, EQ, and pro-quality effects,...
Buy It Now! For More Information
Roland ARX-02
Roland ARX-02 Roland ARX-02 Description: World's first Expansion Board featuring SuperNATURAL™ technology The ARX series Expansion Board is synth itself, powered by Roland's proprietary SuperNATURAL™ sound technology for organic, emotional expression. Optimized effects and custom graphic interfaces are exclusive to the ARX series. The ARX allows you to create unique instruments with the highest-quality sounds and organic control. With stunning SuperNATURAL sound, detailed control, and ultrarealisticamp modeling, the ARX-02 Electric Piano Expansion Board puts new expression and realism into a classic instrument category. Change the position of the pickup, and choose from five amazing amp models with dynamic control. Volume and tone change smoothly and realistically as you play, based on the strength and weakness of the keyboard performance. Roland ARX-02 Features: Faithfully reproduce the classic electric-piano sound, with additional power to customize the tone in ways that were not possible with the original instruments. With the ARX-02 it feels as if you are playing your own legendary vintage piano. SuperNATURAL faithfully reproduces the distinctive characteristics and tonal features of the electric piano, and adds capabilities that were not possible on the original instruments. The ARX board comes loaded with preamps from five types of electric pianos,...
Buy It Now! For More Information
Roland ARX-03
"Roland ARX-03 Roland ARX-03 Description: SuperNATURAL™ Expansion Board ""BRASS"" Authentic Solo Instruments and Ensembles Powered by Roland's unique SuperNATURAL engine, ARX-03 is packed with high-quality brass instruments under the control of a custom graphic-editing interface. ARX-03 enables authentic performance never before achieved with conventional keyboards. The card is loaded with solo instruments and ensembles, including trumpets, flugelhorns, trombones, saxophones, and more. Essential brass instruments and ensembles onboard Visual editing interface; 50 user memory locations Customize every instrument with unique features such as Growl, Noise High-quality effects onboard: EQ (6 systems), reverb (8 types), multi-effects (15 types) Roland ARX-03 Features: From expressive solo performances to powerful ensembles Reproduce the intense vitality of live brass with a keyboard ARX-03 includes eight instruments that replicate the detailed characteristics of solo brass and ensembles, including fluid dynamic changes, pitch-bend effects, legato blurring, even half-valve playing when performing trills on the trumpet. You can control the characteristics of six virtual players onboard the ARX-03, making it possible to create authentic brass ensembles imbued with organic, human quality. When played individually, each instrument is in unison mode; when played in ...
Buy It Now! For More Information
Ibanez ARX140
Ibanez ARX140 Ibanez ARX140 Description: The Ibanez ARX140 6-String Electric Guitar, Black. Set-neck construction, superior hardware, warm mahogany tone and sustain. The Ibanez ARX140 electric guitar is packed with features yet highly affordable. It is a versatile guitar with tones for rock and metal styles. The Ibanez ARX140-BK has a mahogany body with maple top, a fast and comfortable ARX mahogany set-in neck, a rosewood fingerboard with dot inlays and 22 medium frets. The Gibraltar III bridge and the Quik Change III tailpiece deliver stability for heavy users. The ARX-140 is loaded with incredible Ibanez ACH humbucking pickups for versatile rock tones. Ibanez ARX140 Features: IBANEZ ARX140-WH E-Guitar Artist Series Mahogany Body Maple Top set in Mahogany Neck Rosewood Fretboard 22 Frets ARX Special Inlays Gibraltar III Bridge with Quick Change III Tailpiece Chrome Hardware 2 x Humbuckers (ACH1 Neck and ACH2 Bridge Color: White, incl. Gigbag and Strap Get your Ibanez ARX140 today!
Buy It Now! For More Information
Ibanez ARX320
"Ibanez ARX320 Ibanez ARX320 Description: For over 30 years, the classic Artist design has provided a real, high quality alternative to ""the other famous mahogany double humbucker."" The more recent ARX and ART single cutaway offer new, striking finishes, active pickups and more modern variations on the set-neck Artist theme at unprecedented low prices. ARX320 features a 1-piece mahogany set-in ARX neck. Pickups: Bridge Pickup Name: ARTCORE 2-S Model No: ACH2-S Construction: Humbucking Magnet: Ceramic Description: Tight tone with added treble. Bridge version of ACH1-S. Neck Pickup Name: ARTCORE 1-S Model No: ACH1-S Construction: Humbucking Magnet: Ceramic Description: Tight and trebly tone. Neck Dimensions: Scale/Length 628mm/24.75"" a: Width at Nut 43mm b: Width Last Fret 58.5mm c: Thickness 1st Fret 20mm d: Thickness 12th Fret 22.5mm Radius 305mm Ibanez ARX320 Specifications: Neck Material: Mahogany Neck Type: ARX set-in Body: Mahogany body/ Quilted Maple top Frets: Medium frets Fingerboard: Bound Rosewood Inlay: ARX special inlay Bridge: Gibraltar III bridge NeckPU: ACH1-S BridgePU: ACH2-S HW Color: CH Finishes: TKS, TCR Get your Ibanez ARX320 today!"
Buy It Now! For More Information
Ibanez ARX500
"Ibanez ARX500 Ibanez ARX500 Description: The Ibanez Artist ARX500 Electric Guitar adds showtime cosmetics to solid rocker virtues. It features a mahogany double-cutaway body with a carved quilted maple top, set Artist neck with a bound rosewood fretboard and elegant inlays, Gibraltar 3 bridge with unique tailpiece, and dual Super 58 custom humbucking pickups. Classic neck binding and original design inlays on the deluxe ARX500. An exquisite quilted maple top on the ARC500 is enhanced with flamed maple body binding. A Gibraltar III bridge ensures tuning stability and easy intonation adjustments. Custom 58 pickups offer a warm and versatile sound. The ARX500AMB boasts an ARX Custom set-in mahogany neck and the smooth neck heel increases ease of movement and upper fret access. Pickups: Bridge Pickup Name: CUSTOM 58 Model No: C58 Construction: Humbucking Magnet: Ceramic Description: Classic, warm and versatile. Neck Pickup Name: CUSTOM 58 Model No: C58 Construction: Humbucking Magnet: Ceramic Description: Classic, warm and versatile. Neck Dimensions: Scale/Length 628mm/24.75"" a: Width at Nut 43mm b: Width Last Fret 58.5mm c: Thickness 1st Fret 20mm d: Thickness 12th Fret 22.5mm Radius 305mm Ibanez ARX500 Specifications: Neck Material: Mahogany Neck Type: ARX Custom set-in Body: Mahogany body/ Quilted Maple top Frets: Medium frets Fingerboard: Bound Rosewood...
Buy It Now! For More Information
Galaxy Audio AS-1000
Galaxy Audio AS-1000 The Any Spot (AS-1000) is the new wireless in ear monitor from Galaxy Audio. Galaxy Audio has been manufacturing the Hot Spot personal monitor for 30 years. The Any Spot is the latest monitor from the 'Monitor Guys'. In-ear monitors are effective at eliminating stage noise, protecting users' ears from damage, allowing the user to move around a stage or audience and continue to hear, and eliminate feedback. The Any Spot is easy to use. The Any Spot replaces floor wedges and the amplifiers that power them. Simply plug the Any Spot into a 'monitor out' jack on a mixing console, create the desired mix, and it's ready to deliver quality sound. The Any Spot has 64 selectable UHF frequencies to help locate the best and clearest one to transmit signal. The transmitter (AS-1000T) is selectable to either mono or stereo. The Any Spot AS-1000 features a true diversity receiver. The true diversity receiver (AS-1000R) has two antennas. Each antenna seeks the signal from the transmitter individually. This means fewer dropouts than a non-diversity system. In the rare event of a dropout, the 'Auto-Mute' feature kicks in. Auto-Mute prevents intermittent static from going into the users ears. The Any Spot is also a great assistive listening system. The AS-1000T will transmit to numerous receivers. Simply patch the program signal to the transmitter a...
Buy It Now! For More Information
Galaxy Audio AS-1000R
Galaxy Audio AS-1000R The Any Spot (AS-1000R) is the new wireless in-ear monitor from Galaxy Audio. Galaxy Audio has been manufacturing the Hot Spot personal monitor for 30 years. The Any Spot is the latest monitor from the 'Monitor Guys'. In-ear monitors are effective at eliminating stage noise, protecting users ears from damage, allowing the user to move around a stage or audience and continue to hear, and eliminate feedback. The Any Spot AS-1000 features a true diversity receiver. The true diversity receiver (AS-1000R) has two antennas. Each antenna seeks the signal from the transmitter individually. This means fewer dropouts than a non-diversity system. In the rare event of a dropout, the 'Auto-Mute' feature kicks in. Auto-Mute prevents intermittent static from going into the users ears. The Any Spot is also a great assistive listening system. The AS-1000T will transmit to numerous receivers. Simply patch the program signal to the transmitter and give each parishioner or attendee a receiver so all can hear clearly. The Any Spot is a great alternative for performers who are tired of lugging around heavy and bulky floor monitors and tired of leaving a gig with ringing ears. The Any Spot allows the user to move freely around the stage or audience and continue to hear the monitor mix. The Any Spot package is also lighter in weight than floor monitors, ...
Buy It Now! For More Information
Galaxy Audio AS-1000RC-5
Galaxy Audio AS-1000RC-5 AS-1000R 5 pack with DC Charger and Case. 5 - AS-1000R's with choice of ear bud or ear cups; carrying case; AS-DCC charging unit and 5 charging cables. Specifications: AS1000R (RECEIVER) Carrier Frequency Range: UHF band 682~698 MHz. 64 CH Oscillator: PLL synthesized Modulation: FM Receiving Mode: Single channel. Diversity Frequency Stability: ±0.005% S/N ratio: >94dB, at 15KHz deviation and 60dBuV Antenna input Power Supply: DC 3V (2 x 1.5V AA batteries or rechargeable batteries) Image and Spurious Rejection: 80 dB minimum Receiving Sensitivity: At 5 dBµV over 80 dB S/N ratio Selectivity >50dB AF Response Headphone: 100Hz to 10KHz (±3dB) Line: 100Hz to 10KHz (±3dB) T.H.D.: <1% (at 1KHz) IF Frequency: 1st 56MHz; 2nd 10.7MHz Dynamic Range: >96dB Audio Output Headphone Stereo output: 20mW, Line Stereo output level: -10dB Current Consumption: 130mA ± 10mA Case: Body pack Dimension W x H x D: 3" x 4.2" x 1.2" (76 x 106 x 29mm) Get Your Galaxy Audio AS-1000RC-5 Today!
Buy It Now! For More Information
Galaxy Audio AS-1000T
Galaxy Audio AS-1000T The Galaxy AS-1000T transmitter features RCA, XLR, and 1/4" inputs on the back and allows simultaneous broadcast of audio signals from a source such as a CD player, tape player, computer, iPod, etc, and a microphone while offering individual level adjustment for each of the 2 sources. This works great for presentations or for a solo performer who wants to monitor a microphone and backing track. Features: Low power FM broadcasting transmitter Can simultaneously transmit stereo music (from sources such as CD players, MP3 players, etc.) and vocal audio (from wired or wireless microphone systems) Can also be interfaced with a mixing console to transmit an entire monitor mix to the performer Up to 64 selectable frequencies are available to set up a multi-frequency broadcasting system while avoiding interference The two rotary switches allow the user to easily select the group number (1-8), and channel number (1-8). These two selections make up the frequency program number, which is then brightly displayed on the front panel 1/4"/XLR combo MIC jack accepts a balanced or unbalanced, line or microphone signal. RCA LINE IN jacks accept stereo or mono audio signals from CD players, MP3 players, etc. (Switchable Stereo/Mono modes.) Independent input volume controls allow the user greater control when mixing two audio s...
Buy It Now! For More Information
Galaxy Audio AS-1100
Galaxy Audio AS-1100 The AS-1100 packs an amazing punch. The transmitter has stereo XLR/¼" inputs, headphone output, and LCD display which displays the channel and input level. The Receiver has an LCD with channel, battery level, and RF/AF indicator. The AS-1100 is perfect for anyone looking for their first system or to upgrade to the next level. Features: Single Rack Mount Included 300’ Range UHF Frequency 120 Selectable Channels Ear Buds Get Your Galaxy Audio AS-1100 Today!
Buy It Now! For More Information
Galaxy Audio AS-1100-4
Galaxy Audio AS-1100-4 Galaxy Audio's 1100 Band Pack systemincludes four receivers and one transmitter. The AS-1100-4 will allow a band to send one stereo mix to 4 individuals (additional receivers may be purchased separately). Additional transmitters may be purchased separately as well in order to add mixes. Features: Single rack mount for transmitter included 300 ft. range UHF frequency 120 selectable channels 4 pairs of ear buds Get Your Galaxy Audio AS-1100-4 Today!
Buy It Now! For More Information
Galaxy Audio AS-1100R
Galaxy Audio AS-1100R Features: LCD Display with backlight Headphone Output Volume Control 4-Bar Battery Life Indicator RF and AF Indicator 100 mW Headphone Output 2 AA Batteries Ear Buds Included 80 mW Audio Output 3.5 oz (100 g) Get Your Galaxy Audio AS-1100R Today!
Buy It Now! For More Information
Galaxy Audio AS-1100T
Galaxy Audio AS-1100T Features: Light-Up LCD Display Channel Number and Frequency 120 Selectable Channels XLR/ 1/4" Combo Input AF L/R Indicator RF Output Get Your Galaxy Audio AS-1100T Today!
Buy It Now! For More Information
Galaxy Audio AS-1500
Galaxy Audio AS-1500 The AS-1500 is designed with features for the professional. The body pack receiver is set up for a king. With 100mW of output to the ear buds, the AS-1500R is sure to be plenty loud for any environment. The receiver has a built in EQ boost, an option to turn the limiter On/Off, LCD display, button lock, and L/R balance control. Features: Single Rack Mount Included 300’ Range UHF Frequency 120 Selectable Channels Ear Buds Get Your Galaxy Audio AS-1500 Today!
Buy It Now! For More Information
Galaxy Audio AS-1500-4
Galaxy Audio AS-1500-4 Assistive Listening Systems are used in applications where there are hard of hearing attendees. The system includes an AS-1000T (transmitter) and multiple AS-1000R (receivers w/ear buds). Simply plug the AS-1000T into the output of the mixing board and find an available channel. The AS-1000T will broadcast the signal to any number of receivers (must have the same channel selected as the transmitter). This allows each hard of hearing attendee to adjust the volume to his/her liking. FOR BANDS: This system also works great for a band. The AS-ALS-4 will allow a band to operate with wireless monitors all using the same mix. Additional receivers may be added for other members. The AS-ALS-4 comes complete with 1 AS-1000T (transmitter), 4 AS-1000R (receiver), 4 EB1 (ear buds), 1 AS-DCC (DC Charger), 4 DC Charging cables and all the rack mount accessories. Get Your Galaxy Audio AS-1500-4 Today!
Buy It Now! For More Information
|
